1. The reason for the engine crankshaft breakage: the precursor of the valve falling into the cylinder: the valve falling into the cylinder is generally caused by the broken valve rod, the broken valve spring, the cracked valve spring seat, the falling off of the valve lock and other reasons.
2. The reason for the failure of the engine crankshaft fracture The rounded corners at both ends of the crankshaft neck are too small. When grinding the crankshaft, the grinder failed to correctly control the rounded angle of the crankshaft. In addition to the rough arc processing, the radius of the rounded corner is also too small.Therefore, when the crankshaft is working, there is a large concentration of stress at the rounded corner, which shortens the fatigue life of the crankshaft.
3. The reasons for the crankshaft breakage are generally as follows: 1 The different centers of the center line of the main bearing cause the crankshaft to be fatigued early due to alterchange stress, resulting in a crankshaft breakage accident.
4. The reasons for the fracture of the crankshaft are generally as follows: - The center line of the main bearing is eccentric, causing the crankshaft to be subjected to alternating stress and early fatigue, resulting in the crankshaft fracture accident. - In addition to the deformation of the parts themselves, the main bearing is often caused by the improper hole of the main bearing seat during maintenance, assembly or scraping.
5. The fracture of curved uranium is mainly caused by fatigue, and most of them are manifested in the stress concentration part, that is, near the rounded corner and oil hole at the junction of the crankneck and the crank arm. The breakage of the crankshaftCracks do not appear immediately, but form cracks at the beginning. After the stress is concentrated, the cracks gradually expand, and finally lead to disconnection.
6. The reasons for the fracture of the crankshaft of the diesel engine are: the impact of unbalanced load (1) Unbalanced weight. When grinding the crankshaft, after the neck size of the connecting rod becomes smaller, the weight will be reduced compared with the original factory. (2) Unbalanced force arm.
1. The engine fuselage group is the installation basis of various engine mechanisms, systems and some other components, and it is also a crank connecting rod mechanism and gas distribution machine. The assembly matrix of the structure, fuel supply system, cooling system and lubrication system. ( 2) Gas distribution mechanism The gas distribution mechanism is composed of valve group and valve transmission group.
2. Cylinder, 12-cylinder, 16-cylinder, of course, these engines will have L-in-line, V-type and W-type layouts respectively. As we usually see, there are basically in-line three-cylinder engines, in-line four-cylinder engines, in-line six-cylinder engines, v-type six-cylinder engines, v-type eight-cylinder engines, etc.
3. Car engine maintenance knowledgeKnow the common faults of the engine. First of all, pay attention to the maintenance of the running-in period, which is the basis for extending the service life of the engine. Be careful of the two common problems of the engine: 1) Engine wear.
4. Modern car engines mostly use four-cylinder, six-cylinder and eight-cylinder engines.
5. The engine is the heart of a car. Once the engine fails, the car often has to lie down. The economy, power, emission and environmental protection of the whole vehicle are all related to the operation of the engine. Therefore, maintaining the engine is the first task of maintaining the car.
6. Automobile Maintenance Knowledge Engine Chapter Use lubricant of appropriate quality grade. For gasoline engines, SD-SF-grade gasoline oil should be selected according to the additional devices and working conditions of the intake and exhaust system; for diesel engines, CB-CD-grade diesel oil should be selected according to the mechanical load.The requirements not lower than those stipulated by the manufacturer shall prevail.
1. Scratches occur on the surface of the crankshaft neck, mainly caused by the impurities such as grinding grains in the gap.
2. Crack inspection: Because the stress is concentrated in the rounded corner of the axle neck and around the oil hole, it is easy to produce cracks, the existence of cracks will lead to the fracture of the crankshaft. Therefore, flaw detectors (such as magnetic particle flaw detectors, ultrasonic flaw detectors, etc.) should be used to detect whether there are cracks.
3, 1 Clean the crankshaft. After wiping it dry, support the first and last spindle necks of the crankshaft with V-shaped blocks, and put the per centimeter touch needle against the unworn part of the bearing groove on the middle spindle neck.2 Slowly rotate the crankshaft (should avoid the position of the oil hole), find out the smallest reading reflected on the percentage meter, and rotate the dial to make the table point to zero.
4. Inspection of crankshaft neck wear (1) Clean and blow dry the crankshaft to be inspected, and place it on the crankshaft support frame; (2) Select a micrometer with an appropriate range and correct the scale.
5. When idling, unplug the high-pressure wire of each cylinder or the fuel injector harness plug one by one, and check whether each cylinder of the engine is working evenly. If the engine speed decreases significantly when the high-voltage wire or injector harness plug of a cylinder is unplugged, it means that the cylinder is not working poorly, and the cylinder spark plug and injector should be disassembled and checked.
6. Therefore, it must be inspected in engine repair. Cause of failure (1) The diesel engine does not work smoothly, and the force of each axle neck is uneven.(2) The diesel engine is suddenly overloaded, causing the crankshaft to vibrate excessively. ( 3) Diesel engines often have "explosive" combustion, so that the crankshaft is often subjected to impact load.
However, due to the huge force of these two parts, there will inevitably be a certain degree of wear during use; if the lubrication is poor or the engine load is too large, other types of damage will occur. Common forms of damage to crankshafts include shaft neck wear, cracks, ablation, bending, distortion and fracture.
But because these two parts are subjected to great force, there will inevitably be a certain degree of wear during use;If the lubrication is poor or the engine load is too heavy, there will be other types of damage. Common forms of damage to crankshafts include shaft neck wear, cracks, cauterization, bending, distortion, fracture, etc.
The main cause of crankshaft wear is poor lubrication, which may also be caused by the engine running in the high-speed zone for a long time. The crankshaft is a very important part of the engine. The crankshaft and connecting rod are the parts that transform the up and down motion of the piston into a rotating motion. The small head of the connecting rod is connected to the piston, and the large head of the connecting rod is connected to the crankshaft.
1. The methods of engine maintenance are: regularly replace the oil and oil filter; keep the crankcase well ventilated; regularly clean the fuel system;Clean the water tank regularly; clean the crankcase regularly.
2. The following is the function of the crankshaft of the automobile engine: the function of the crankshaft balance weight (also known as the counterweight) is to balance the rotational centrifugal force and its torque, and sometimes it can also balance the reciprocating inertial force and its moment; when these forces and moments themselves reach balance, the balance weight can also be used to reduce the load of the main bearing.
3. To balance the unbalanced centrifugal moment of the engine, it is sometimes also used to balance part of the reciprocating inertial force, so that the crankshaft rotates smoothly. The front end of the crankshaft is equipped with timing gears, pulleys to drive fans and pumps, and starting claws, etc.
4. The function of the crankshaft is to change the thrust from the piston connecting rod into a rotating torsion force, to change the reciprocating linear motion of the piston into a circular rotation movement of the crankshaft, and then activate it through the flywheel.The torque of the machine is transmitted to the transmission system, and also drives the gas distribution mechanism and other auxiliary devices of the engine.
5. The function of the crankshaft is to bear the force from the connecting rod and convert it into a torque output through the crankshaft and drive other accessories on the engine to work. The crankshaft is subjected to the combined action of the centrifugal force of the rotating matter, the periodically changing gas inertial force and the reciprocating inertial force, so that the curved bearing is affected by the bending torsion recharge.
1. Effective power Basic explanation: full name "engine effective power", abbreviated as "shaft power". The net output power on the engine shaft. It is the power effectively output by the engine after deducting its own mechanical friction loss and the external loss of driving other auxiliary machines.
2. Effective power refers to the power that the engine is actually used to drive the vehicle or generate power. It is obtained by subtracting the output power of the engine from the mechanical loss. The effective power of the engine is usually measured by the power generated per unit of time (such as horsepower or kilowatt). It can change according to the design and working conditions of the engine.
3. The effective power of the engine is also known as "shaft power". It refers to the net output power on the engine shaft. It is the power effectively output by the engine after deducting its own mechanical friction loss and the external loss of driving other auxiliary machines.
4. Effective power: the ratio of the power emitted by the engine at a certain speed to the maximum power that may be emitted at the same speed. The full name is "engine effective power", abbreviated as "shaft power". The net output power on the engine shaft.
Commodity price indexing by HS code-APP, download it now, new users will receive a novice gift pack.
1. The reason for the engine crankshaft breakage: the precursor of the valve falling into the cylinder: the valve falling into the cylinder is generally caused by the broken valve rod, the broken valve spring, the cracked valve spring seat, the falling off of the valve lock and other reasons.
2. The reason for the failure of the engine crankshaft fracture The rounded corners at both ends of the crankshaft neck are too small. When grinding the crankshaft, the grinder failed to correctly control the rounded angle of the crankshaft. In addition to the rough arc processing, the radius of the rounded corner is also too small.Therefore, when the crankshaft is working, there is a large concentration of stress at the rounded corner, which shortens the fatigue life of the crankshaft.
3. The reasons for the crankshaft breakage are generally as follows: 1 The different centers of the center line of the main bearing cause the crankshaft to be fatigued early due to alterchange stress, resulting in a crankshaft breakage accident.
4. The reasons for the fracture of the crankshaft are generally as follows: - The center line of the main bearing is eccentric, causing the crankshaft to be subjected to alternating stress and early fatigue, resulting in the crankshaft fracture accident. - In addition to the deformation of the parts themselves, the main bearing is often caused by the improper hole of the main bearing seat during maintenance, assembly or scraping.
5. The fracture of curved uranium is mainly caused by fatigue, and most of them are manifested in the stress concentration part, that is, near the rounded corner and oil hole at the junction of the crankneck and the crank arm. The breakage of the crankshaftCracks do not appear immediately, but form cracks at the beginning. After the stress is concentrated, the cracks gradually expand, and finally lead to disconnection.
6. The reasons for the fracture of the crankshaft of the diesel engine are: the impact of unbalanced load (1) Unbalanced weight. When grinding the crankshaft, after the neck size of the connecting rod becomes smaller, the weight will be reduced compared with the original factory. (2) Unbalanced force arm.
1. The engine fuselage group is the installation basis of various engine mechanisms, systems and some other components, and it is also a crank connecting rod mechanism and gas distribution machine. The assembly matrix of the structure, fuel supply system, cooling system and lubrication system. ( 2) Gas distribution mechanism The gas distribution mechanism is composed of valve group and valve transmission group.
2. Cylinder, 12-cylinder, 16-cylinder, of course, these engines will have L-in-line, V-type and W-type layouts respectively. As we usually see, there are basically in-line three-cylinder engines, in-line four-cylinder engines, in-line six-cylinder engines, v-type six-cylinder engines, v-type eight-cylinder engines, etc.
3. Car engine maintenance knowledgeKnow the common faults of the engine. First of all, pay attention to the maintenance of the running-in period, which is the basis for extending the service life of the engine. Be careful of the two common problems of the engine: 1) Engine wear.
4. Modern car engines mostly use four-cylinder, six-cylinder and eight-cylinder engines.
5. The engine is the heart of a car. Once the engine fails, the car often has to lie down. The economy, power, emission and environmental protection of the whole vehicle are all related to the operation of the engine. Therefore, maintaining the engine is the first task of maintaining the car.
6. Automobile Maintenance Knowledge Engine Chapter Use lubricant of appropriate quality grade. For gasoline engines, SD-SF-grade gasoline oil should be selected according to the additional devices and working conditions of the intake and exhaust system; for diesel engines, CB-CD-grade diesel oil should be selected according to the mechanical load.The requirements not lower than those stipulated by the manufacturer shall prevail.
1. Scratches occur on the surface of the crankshaft neck, mainly caused by the impurities such as grinding grains in the gap.
2. Crack inspection: Because the stress is concentrated in the rounded corner of the axle neck and around the oil hole, it is easy to produce cracks, the existence of cracks will lead to the fracture of the crankshaft. Therefore, flaw detectors (such as magnetic particle flaw detectors, ultrasonic flaw detectors, etc.) should be used to detect whether there are cracks.
3, 1 Clean the crankshaft. After wiping it dry, support the first and last spindle necks of the crankshaft with V-shaped blocks, and put the per centimeter touch needle against the unworn part of the bearing groove on the middle spindle neck.2 Slowly rotate the crankshaft (should avoid the position of the oil hole), find out the smallest reading reflected on the percentage meter, and rotate the dial to make the table point to zero.
4. Inspection of crankshaft neck wear (1) Clean and blow dry the crankshaft to be inspected, and place it on the crankshaft support frame; (2) Select a micrometer with an appropriate range and correct the scale.
5. When idling, unplug the high-pressure wire of each cylinder or the fuel injector harness plug one by one, and check whether each cylinder of the engine is working evenly. If the engine speed decreases significantly when the high-voltage wire or injector harness plug of a cylinder is unplugged, it means that the cylinder is not working poorly, and the cylinder spark plug and injector should be disassembled and checked.
6. Therefore, it must be inspected in engine repair. Cause of failure (1) The diesel engine does not work smoothly, and the force of each axle neck is uneven.(2) The diesel engine is suddenly overloaded, causing the crankshaft to vibrate excessively. ( 3) Diesel engines often have "explosive" combustion, so that the crankshaft is often subjected to impact load.
However, due to the huge force of these two parts, there will inevitably be a certain degree of wear during use; if the lubrication is poor or the engine load is too large, other types of damage will occur. Common forms of damage to crankshafts include shaft neck wear, cracks, ablation, bending, distortion and fracture.
But because these two parts are subjected to great force, there will inevitably be a certain degree of wear during use;If the lubrication is poor or the engine load is too heavy, there will be other types of damage. Common forms of damage to crankshafts include shaft neck wear, cracks, cauterization, bending, distortion, fracture, etc.
The main cause of crankshaft wear is poor lubrication, which may also be caused by the engine running in the high-speed zone for a long time. The crankshaft is a very important part of the engine. The crankshaft and connecting rod are the parts that transform the up and down motion of the piston into a rotating motion. The small head of the connecting rod is connected to the piston, and the large head of the connecting rod is connected to the crankshaft.
1. The methods of engine maintenance are: regularly replace the oil and oil filter; keep the crankcase well ventilated; regularly clean the fuel system;Clean the water tank regularly; clean the crankcase regularly.
2. The following is the function of the crankshaft of the automobile engine: the function of the crankshaft balance weight (also known as the counterweight) is to balance the rotational centrifugal force and its torque, and sometimes it can also balance the reciprocating inertial force and its moment; when these forces and moments themselves reach balance, the balance weight can also be used to reduce the load of the main bearing.
3. To balance the unbalanced centrifugal moment of the engine, it is sometimes also used to balance part of the reciprocating inertial force, so that the crankshaft rotates smoothly. The front end of the crankshaft is equipped with timing gears, pulleys to drive fans and pumps, and starting claws, etc.
4. The function of the crankshaft is to change the thrust from the piston connecting rod into a rotating torsion force, to change the reciprocating linear motion of the piston into a circular rotation movement of the crankshaft, and then activate it through the flywheel.The torque of the machine is transmitted to the transmission system, and also drives the gas distribution mechanism and other auxiliary devices of the engine.
5. The function of the crankshaft is to bear the force from the connecting rod and convert it into a torque output through the crankshaft and drive other accessories on the engine to work. The crankshaft is subjected to the combined action of the centrifugal force of the rotating matter, the periodically changing gas inertial force and the reciprocating inertial force, so that the curved bearing is affected by the bending torsion recharge.
1. Effective power Basic explanation: full name "engine effective power", abbreviated as "shaft power". The net output power on the engine shaft. It is the power effectively output by the engine after deducting its own mechanical friction loss and the external loss of driving other auxiliary machines.
2. Effective power refers to the power that the engine is actually used to drive the vehicle or generate power. It is obtained by subtracting the output power of the engine from the mechanical loss. The effective power of the engine is usually measured by the power generated per unit of time (such as horsepower or kilowatt). It can change according to the design and working conditions of the engine.
3. The effective power of the engine is also known as "shaft power". It refers to the net output power on the engine shaft. It is the power effectively output by the engine after deducting its own mechanical friction loss and the external loss of driving other auxiliary machines.
4. Effective power: the ratio of the power emitted by the engine at a certain speed to the maximum power that may be emitted at the same speed. The full name is "engine effective power", abbreviated as "shaft power". The net output power on the engine shaft.
European trade compliance guidelines
author: 2024-12-23 22:20Russia HS code-based trade compliance
author: 2024-12-23 21:40Trade data for pharmaceuticals supply chain
author: 2024-12-23 21:39How to ensure trade compliance audits
author: 2024-12-23 21:16Metal scrap HS code classification
author: 2024-12-23 20:32How to ensure tariff compliance
author: 2024-12-23 22:38How to calculate landed costs accurately
author: 2024-12-23 22:01Plant-based proteins HS code verification
author: 2024-12-23 21:42How to access niche export markets
author: 2024-12-23 21:05How to manage complex customs laws
author: 2024-12-23 21:03
Global trade finance benchmarking
371.89MB
Check
How to use data for HS code classification
462.77MB
Check
Commodity-specific import licensing data
844.72MB
Check
Carbon steel HS code references
475.44MB
Check
High-value machinery HS code classification
563.84MB
Check
HS code-driven product bundling strategies
597.29MB
Check
Pharma finished goods HS code references
558.72MB
Check
Actionable global trade insights
372.59MB
Check
How to use data for HS code classification
874.53MB
Check
Supplier relationship management with trade data
491.26MB
Check
Advanced trade data analytics techniques
776.99MB
Check
HS code electrical machinery data
617.34MB
Check
How to find reliable global suppliers
859.99MB
Check
Trade data for food and beverage industry
416.22MB
Check
Food and beverage HS code mapping
135.66MB
Check
How to identify monopolistic suppliers
585.15MB
Check
Global trade certification services
466.14MB
Check
How to find authorized economic operators
237.31MB
Check
Pharma supply chain mapping by HS code
475.68MB
Check
Country of import HS code variations
561.53MB
Check
APAC special tariff HS code listings
396.29MB
Check
How to identify export-ready products
742.69MB
Check
How to use trade data for pricing strategy
918.21MB
Check
Processed foods HS code mapping
939.28MB
Check
Enhanced shipment documentation verification
422.15MB
Check
HS code-driven cross-border e-commerce
427.95MB
Check
Ceramics imports HS code mapping
958.21MB
Check
Sourcing intelligence from customs data
425.21MB
Check
How to interpret global trade indicators
629.19MB
Check
Export subsidies linked to HS codes
811.94MB
Check
HS code-based quality control checks
661.95MB
Check
Steel industry HS code references
898.25MB
Check
Industry consolidation via HS code data
782.57MB
Check
Real-time supply chain financing insights
238.36MB
Check
Real-time commodity flow tracking
191.62MB
Check
In-depth customs data analysis tools
389.87MB
Check
Scan to install
Commodity price indexing by HS code to discover more
Netizen comments More
2993 Maritime logistics HS code mapping
2024-12-23 22:00 recommend
1866 Processed meat HS code verification
2024-12-23 21:54 recommend
263 HS code guides for automotive parts
2024-12-23 20:59 recommend
2984 International trade route optimization
2024-12-23 20:47 recommend
2413 Leather goods HS code classification
2024-12-23 20:38 recommend