If you check and change the oil regularly and go to the service station for maintenance, the engine generally does not need to be repaired after driving for 4 to 5 years.
Hello, the whole vehicle warranty is 60,000 yuan for 3 years, and the engine gearbox is 100,000 yuan for 5 years [If there is a problem with the car, ask the car master.4S store professional technician, 10 minutes to solve.
A series of advanced technologies are adopted inside the engine, such as roller rocker arm, hydraulic column, etc., which effectively reduces the failure rate of the engine.
According to relevant statistics, Baojun 560 has been on the market for three years, and only more than 600,000 vehicles have been sold in total. From the launch of the new car to the final distinuation of production, the lifespan of the Baojun 560 is only three years. It is really a pity that the former head of the Baojun brand has now come to the end of his life.
1. This idling jitter may be caused by too much carbon accumulation in your engine or throttle valve, which is still relatively common.
2. The reason for the start-up jitter of the manual transmission is generally caused by the wear and slippage of the clutch pressure plate and disc, most of which are due to aging or quality reasons. This requires replacing the pressure plate and the disc at the same time.
3. It is normal for the car to jitter in the idling state, but the serious jitter phenomenon indicates that the engine of the car has serious carbon accumulation. It is necessary to clean the throttle valve and spark plug in time, otherwise it will cause damage to the engine of the car.
4. The idle speed is relatively high at the beginning of the start, and it is normal for the shaking amplitude to be large. If the car still shakes a lot after heating up, you need to check the spark plugs, oil line and throttle valves. If you are satisfied, please adopt it.
5. The main reasons for engine shaking are as follows: air filter is dirty: air filter is for protectionThe engine is designed to reduce wear and is generally replaced at about 10,000 kilometers. If the replacement is not in time, it will cause insufficient air intake and low idle speed, and the engine will shake. As long as the filter is replaced, it can be solved.
6. Too much carbon accumulation If the carbon accumulation in the engine cylinder is serious, it will cause spark plug blockage and valve blockage, which directly leads to the car's jitter when idling. If the acceleration ability of the car is not as good as before and the shaking is very long-lasting, you can consider cleaning the inside of the engine cylinder.
Baojun 560 is fully equipped with an 8L VVT-i all-aluminum engine, which has obvious advantages of low speed and large torque, maximum power 101 kW, maximum torque 186N·m.The comprehensive fuel consumption is as low as 5L/100km, high power, low fuel consumption, and more cost-effective.
Luxury model: 1.28 million yuan "Luxury model" is the basic configuration of Baojun 560, and it is also the cheapest configuration. It is equipped with a 5L naturally aspirated engine with a maximum power of 82kW and a peak torque of 146Nm, matched with a 5-speed manual transmission or CVT transmission.
The body weight of Baojun 560 is 1545KG, and the body mass of Baojun 730 is 1500KG. The relevant parameters of Baojun 560 are as follows: model parameters. Power system. Chassis system. The relevant parameters of Baojun 730 are as follows: parameters of the whole vehicle. Basic performance. Chassis system.
Safety configuration The 560 Baojun car adopts a new safety configuration and has rich safety performance.It is equipped with a panoramic image monitoring system, which can help drivers more effectively grasp the driving status of the vehicle and reduce the occurrence of accidents.
Baojun 560 has 5 seats, the body size data is 4620/1820/1750mm, and the wheelbase reaches 2750mm. In terms of appearance, the Baojun 560 continues the family-style design elements. The willow-shaped headlights are completely integrated with the three-panel chrome-plated air intake grille, which looks very exquisite.
1. Baojun 560 engine is domestic, from Guangxi Wuling Liuji, a subsidiary of Automobile Group, independently developed and developed. The turbocharger of the 5T engine is from Honeywell. Honeywell International is a diversified high-tech and manufacturing enterprise with a turnover of more than $30 billion.
2. The engine model used in Baojun 560 is LJ479qne2, which is a domestic engine independently developed by Wuling Liuqi, a subsidiary of Guangxi Automobile Group. Baojun 560 is an SUV model launched by Baojun, a Chinese car brand. The carThe engine model used is LJ479qne2, which is an engine independently developed by Wuling Liuqi.
3. It is produced by General Motors and is produced by SAIC General Motors Wuling. Baojun 560 is equipped with LJ479QNE2 137 horsepower L4 generator, matched with 5-speed manual transmission and AMT transmission, maximum power (kW) 101, maximum power speed (rpm) 5600, maximum torque (N·m) 186, maximum torque speed (rpm) 3600-4600.
4. Baojun 560 is equipped with 5T and 8L engines, both of which are produced by Baojun's independent technology. The maximum power of Baojun 560 5T turbocharged engine is 110kW/5500rpm., the maximum torque is 230Nm/2000-3800rpm, and the peak torque is as high as 230Nm.
5. LJ479NE2 engine: It is an engine produced by Liuzhou Wuling Liuji Power Co., Ltd., also known as Liuji LJ479NE2. Baojun 560: Baojun 560 is a home SUV from Wuling. It was launched on July 18, 2015, with a total of 3 models launched.
HS code-driven margin analysis-APP, download it now, new users will receive a novice gift pack.
If you check and change the oil regularly and go to the service station for maintenance, the engine generally does not need to be repaired after driving for 4 to 5 years.
Hello, the whole vehicle warranty is 60,000 yuan for 3 years, and the engine gearbox is 100,000 yuan for 5 years [If there is a problem with the car, ask the car master.4S store professional technician, 10 minutes to solve.
A series of advanced technologies are adopted inside the engine, such as roller rocker arm, hydraulic column, etc., which effectively reduces the failure rate of the engine.
According to relevant statistics, Baojun 560 has been on the market for three years, and only more than 600,000 vehicles have been sold in total. From the launch of the new car to the final distinuation of production, the lifespan of the Baojun 560 is only three years. It is really a pity that the former head of the Baojun brand has now come to the end of his life.
1. This idling jitter may be caused by too much carbon accumulation in your engine or throttle valve, which is still relatively common.
2. The reason for the start-up jitter of the manual transmission is generally caused by the wear and slippage of the clutch pressure plate and disc, most of which are due to aging or quality reasons. This requires replacing the pressure plate and the disc at the same time.
3. It is normal for the car to jitter in the idling state, but the serious jitter phenomenon indicates that the engine of the car has serious carbon accumulation. It is necessary to clean the throttle valve and spark plug in time, otherwise it will cause damage to the engine of the car.
4. The idle speed is relatively high at the beginning of the start, and it is normal for the shaking amplitude to be large. If the car still shakes a lot after heating up, you need to check the spark plugs, oil line and throttle valves. If you are satisfied, please adopt it.
5. The main reasons for engine shaking are as follows: air filter is dirty: air filter is for protectionThe engine is designed to reduce wear and is generally replaced at about 10,000 kilometers. If the replacement is not in time, it will cause insufficient air intake and low idle speed, and the engine will shake. As long as the filter is replaced, it can be solved.
6. Too much carbon accumulation If the carbon accumulation in the engine cylinder is serious, it will cause spark plug blockage and valve blockage, which directly leads to the car's jitter when idling. If the acceleration ability of the car is not as good as before and the shaking is very long-lasting, you can consider cleaning the inside of the engine cylinder.
Baojun 560 is fully equipped with an 8L VVT-i all-aluminum engine, which has obvious advantages of low speed and large torque, maximum power 101 kW, maximum torque 186N·m.The comprehensive fuel consumption is as low as 5L/100km, high power, low fuel consumption, and more cost-effective.
Luxury model: 1.28 million yuan "Luxury model" is the basic configuration of Baojun 560, and it is also the cheapest configuration. It is equipped with a 5L naturally aspirated engine with a maximum power of 82kW and a peak torque of 146Nm, matched with a 5-speed manual transmission or CVT transmission.
The body weight of Baojun 560 is 1545KG, and the body mass of Baojun 730 is 1500KG. The relevant parameters of Baojun 560 are as follows: model parameters. Power system. Chassis system. The relevant parameters of Baojun 730 are as follows: parameters of the whole vehicle. Basic performance. Chassis system.
Safety configuration The 560 Baojun car adopts a new safety configuration and has rich safety performance.It is equipped with a panoramic image monitoring system, which can help drivers more effectively grasp the driving status of the vehicle and reduce the occurrence of accidents.
Baojun 560 has 5 seats, the body size data is 4620/1820/1750mm, and the wheelbase reaches 2750mm. In terms of appearance, the Baojun 560 continues the family-style design elements. The willow-shaped headlights are completely integrated with the three-panel chrome-plated air intake grille, which looks very exquisite.
1. Baojun 560 engine is domestic, from Guangxi Wuling Liuji, a subsidiary of Automobile Group, independently developed and developed. The turbocharger of the 5T engine is from Honeywell. Honeywell International is a diversified high-tech and manufacturing enterprise with a turnover of more than $30 billion.
2. The engine model used in Baojun 560 is LJ479qne2, which is a domestic engine independently developed by Wuling Liuqi, a subsidiary of Guangxi Automobile Group. Baojun 560 is an SUV model launched by Baojun, a Chinese car brand. The carThe engine model used is LJ479qne2, which is an engine independently developed by Wuling Liuqi.
3. It is produced by General Motors and is produced by SAIC General Motors Wuling. Baojun 560 is equipped with LJ479QNE2 137 horsepower L4 generator, matched with 5-speed manual transmission and AMT transmission, maximum power (kW) 101, maximum power speed (rpm) 5600, maximum torque (N·m) 186, maximum torque speed (rpm) 3600-4600.
4. Baojun 560 is equipped with 5T and 8L engines, both of which are produced by Baojun's independent technology. The maximum power of Baojun 560 5T turbocharged engine is 110kW/5500rpm., the maximum torque is 230Nm/2000-3800rpm, and the peak torque is as high as 230Nm.
5. LJ479NE2 engine: It is an engine produced by Liuzhou Wuling Liuji Power Co., Ltd., also known as Liuji LJ479NE2. Baojun 560: Baojun 560 is a home SUV from Wuling. It was launched on July 18, 2015, with a total of 3 models launched.
International trade compliance workflow
author: 2024-12-23 22:13High-precision instruments HS code mapping
author: 2024-12-23 22:02Supply chain optimization with trade data
author: 2024-12-23 20:52Mineral fuels HS code data analysis
author: 2024-12-23 20:41Predictive trade route realignment
author: 2024-12-23 22:11How to ensure transparency in supply chains
author: 2024-12-23 21:49Customs authorization via HS code checks
author: 2024-12-23 21:46How to ensure tariff compliance
author: 2024-12-23 21:29Advanced tariff classification tools
author: 2024-12-23 20:38419.69MB
Check574.98MB
Check328.14MB
Check344.24MB
Check388.27MB
Check829.29MB
Check915.71MB
Check249.91MB
Check726.68MB
Check195.29MB
Check352.85MB
Check192.53MB
Check117.29MB
Check816.33MB
Check244.23MB
Check692.92MB
Check281.78MB
Check976.18MB
Check851.24MB
Check275.76MB
Check857.74MB
Check858.87MB
Check313.54MB
Check338.79MB
Check519.29MB
Check647.73MB
Check913.37MB
Check967.55MB
Check231.54MB
Check492.13MB
Check385.25MB
Check793.74MB
Check818.12MB
Check673.49MB
Check216.43MB
Check262.29MB
CheckScan to install
HS code-driven margin analysis to discover more
Netizen comments More
862 Dynamic import export performance metrics
2024-12-23 22:14 recommend
1268 Trade data for industrial raw materials
2024-12-23 22:05 recommend
2879 Polymer resins HS code verification
2024-12-23 21:45 recommend
635 HS code-based freight consolidation
2024-12-23 21:05 recommend
2601 Industry-focused market entry reports
2024-12-23 20:19 recommend