1, no more than 8 tons, all parameters of the D30 engine: cylinder diameter 95mm, stroke 105 Mm, 4-cylinder in-line, 16-valve, double overhead camshaft, supercharged in-cooled, high-pressure common-rail fuel injection, torque 400N.m.
2. Four-five tons. Junling is the basic model of Jianghuai light truck, and it is also the backbone of JAC light truck, located in the medium and short-distance intercity logistics market. Jianghuai light truck is the core business of Jianghuai commercial vehicles, and it is also the cornerstone of the development and growth of Jianghuai Automobile.
3. OK. I drive the new MRT. The engine of Dewei D30 adopts a multi-sleed design, the rear axle speed ratio is 875, and the seats and configurations of the new MRT have been modified and optimized. According to reason, it can pull ten tons.
4. Seven hours. The d30 engine, the full name of Yunnedwei d30 engine, is mainly the introduction of German engine technology, which has a relatively high market share in light trucks. When a truck is planted with eight tons of cargo, it takes an average of 60 kilometers per hour, and it takes about seven hours to run 400 kilometers.
5. High-pressure common rail technology, super-long oil change, more worry-free and effort-saving. Yunnei's engine is famous in the small and medium-sized cylinder diesel engine industry. It is quite solid, anti-fabrication, and the quality can be said to be very good.The sales volume has risen steadily over the years, indicating that the market recognition is high. With 750 tires, it is not a big problem to pull five or six tons to run in the mountains.
6. This car has 0-liter displacement and 156 horsepower. The rear axle is wrapped in 5 tons. This design can pull up to about 10 tons, and the beam is a double-layer design, and the carrying power is barred. You can rest assured to pull 5 to 6 tons at ordinary times. Pulling 10 tons is the steel plate that needs to be strengthened.
TC is the English abbreviation of INTEC, Chinese name is "intelligent fuel-saving king", I is the English intercoole of intercooler R abbreviation. At present, there are two powers, GWM8TCI and GWM5TCI.
Four-cylinder b: Diesel engine 22: Total working volume (engine displacement, 2 liters) tci: It is the so-called turbocharger, (Turbo Charger with Inter-cooler exhaust gas turbocharger) The technology is average, many engine factories Everyone is producing this model of machine, such as Changchai, Yunnei, Hafei, etc.
TID--- It specifically refers to BYD's turbocharging, in-cylinder direct injection and dual clutch technology. TI---refers to turbocharged engines with an intercooler, which is generally divided into TSI and TCI. TSI turbocharged gasoline engine with intercooler TCI turbocharged diesel engine with intercooler.
1, GW5TCI is a high-pressure common-rail technology "intelligent fuel-saving" diesel engine jointly developed by Great Wall Company and Bosch of Germany, which has the advantages of saving, quietness, strength and so on. The power can reach 80kW, the torque is 300N·m, and the comprehensive fuel consumption per 100 kilometers is only 0L, which is the lowest fuel consumption among similar models, and the power of 5L reaches the fuel consumption of a 5L sedan.
2. The engine of the Great Wall Haval h3 diesel version is the 25TCI INTEC "Intelligent Fuel-saving King" electronically controlled high-pressure common rail supercharged medium-cooled diesel engine developed by Great Wall and Bosch of Germany. The engine displacement is 25L, the power is 80Kw3600rpm, and the torque is 300Nm180. Above 02400rpm, I hope to help you.
3. The TCI engine is a diesel engine jointly developed by Great Wall Automobile and Bosch of Germany, which adopts electronically controlled high-voltage common rail technology and is equipped with an intercooler. TC is the English abbreviation of INTEC. The Chinese name is "Intelligent Fuel-saving King", and I is the English abbreviation of intercooler of intercooler. At present, there are two powers, GWM8TCI and GWM5TCI.
4, x0dx0The ax0dx0aTCI engine is a diesel engine jointly developed by Great Wall Automobile and Bosch of Germany, which adopts electronically controlled high-voltage common rail technology and is equipped with an intercooler. TC is the English abbreviation of INTEC. The Chinese name is "Intelligent Fuel-saving King", and I is the English abbreviation of intercooler for intercooler.
5. What engine does Infiniti g 25 use? Infiniti g25 uses a 5-liter v6 naturally aspirated engine. Infiniti G (check the transaction price | detailed explanation of the model) 25 is a medium-sized sedan under Infiniti. The wheelbase of this car is 2850mm, and the length, width and height are 4780mm, 1773mm and 1453mm respectively.
6. Finiti g25 uses a 5-liter v6 naturally aspirated engine.Finiti g25 is a medium-sized car under Finiti in the United Kingdom. Its wheelbase is 2850 mm, and the length, width and height are 4780 mm, 1773 mm and 1453 mm respectively. The Finiti g25 adopts a 5-liter naturally aspirated engine with a maximum torque of 235 horsepower and 253 Nm.
TSI stands for the abbreviation of the first letter of the word TwinchargerFuelStratifiedInjection, which can be understood as double supercharged + layered combustion + injection through the surface meaning of the letters.TSI is a highly efficient engine form, which will be the perfect unity of power and fuel economy.
TSI refers to double-charged turbine and mechanical supercharged layered injection technology, TFSI refers to fuel layered injection, TFSI turbocharged fuel layered injection engine, and this T, which is more than FSI, represents turbocharging.
D: In fact, it is DCT, that is, Dual clutch Transmission, that is, dual clutch transmission, that is, the vehicle volume adopts a dual clutch gearbox. Therefore, TID is a vehicle that adopts a turbocharged in-cylinder direct injection engine and a dual-clutch gearbox.
However, TSI adopts FSI technology, that is, injecting fuel into the cylinder through a high-pressure fuel pump, which is a method of indirect injection compared with direct injection engines.The most prominent feature of this engine is its strong horsepower and excellent economy when traveling at high speed.
1, TID--- specifically refers to turbocharging, in-cylinder direct injection, dual clutch technology. TI---refers to turbocharged engines with an intercooler, which is generally divided into TSI and TCI. TSI turbocharged gasoline engine with intercooler TCI turbocharged diesel engine with intercooler.
2. Automobile turbocharged engines with displacement can improve power and torque under the same displacement, and will not increase too much fuel consumption. The power of a car determines how fast it can run, and the torque determines how much it can carry and how fast it can accelerate.
3. In terms of the price of the whole machine, 5TCI has advantages, and the technology is also very mature. The maximum torque of 0T is larger than that of 5TCI, reaching more than 300 Nm. In addition, the Great Wall launched the 0T engine as an effort for the new emission standards.
4. TSI is the initials of the three key features of Turbo-charging, Super-charging and Injection.
5. The G6 we tested this time is equipped with the same 0TCI engine as the G5. Although the data is not as amazing as the latest in-cylinder direct injection 0TGDI, the maximum power of this 0TCI engine is 125kW@5500rpm, the maximum torque is 235Nm@1900rpm, and it is equipped with timing variable technology, and the book data is also good.
6. Of course, the new 0T engine is better. Compared with the old model, the displacement is smaller, the power and torque have been greatly improved, but the fuel consumption has decreased. The old 5TCI engine is equipped on H3H5, and the new model is now only configured on the new H5.
Four-cylinder engine. According to the official website of Pacific Automobile, the Jianghuai Ruifeng s5 engine model is a four-cylinder turbocharged engine, matched with a six-speed manual transmission and a six-speed dual-clutch transmission, with a maximum speed of 190km/h.
The brand's engine is an in-line three-cylinder engine. 2The 015 Chevrolet Chuangku uses two engines, one is a 0-liter turbocharged engine and the other is a 3-liter turbocharged engine. Both 0T and 3T turbocharged engines are in-line three-cylinder structures.
The Yinglang is a three-cylinder engine. The Yinglang is equipped with two engines, one is a 10-liter turbocharged engine, and the other is a 13-liter turbocharged engine. The Buick Enlang 15T model is equipped with a 10T in-line 3-cylinder turbocharged engine, matching two transmissions: 6-speed manual or 6-speed dual clutch. Box, maximum power 92KW, maximum torque.
Cars with T mean that the engine is turbocharged, and L means that the engine is a naturally aspirated engine.
As of September 11, 2021, Chevrolet models on sale are three-cylinder engines.The 535T model of the Merrybo XL is equipped with a 13T in-line 3-cylinder turbocharged engine, matched with a CVT stepless gearbox, with a maximum power of 121KW and a maximum torque of 240N·m. The 325T335T model is equipped with 10T.
BMW 320li engine parameters are equipped with a 20t turbocharged engine, the model is b48b20d, the maximum power is 115kw, the peak torque is 250nm, the cylinder arrangement is in series, the number of cylinders is 4, and the gas distribution mechanism is dohc with 2021 Take the Ma 320li as an example, which is a medium-sized car with a body size of 4719mm long.
Export subsidies linked to HS codes-APP, download it now, new users will receive a novice gift pack.
1, no more than 8 tons, all parameters of the D30 engine: cylinder diameter 95mm, stroke 105 Mm, 4-cylinder in-line, 16-valve, double overhead camshaft, supercharged in-cooled, high-pressure common-rail fuel injection, torque 400N.m.
2. Four-five tons. Junling is the basic model of Jianghuai light truck, and it is also the backbone of JAC light truck, located in the medium and short-distance intercity logistics market. Jianghuai light truck is the core business of Jianghuai commercial vehicles, and it is also the cornerstone of the development and growth of Jianghuai Automobile.
3. OK. I drive the new MRT. The engine of Dewei D30 adopts a multi-sleed design, the rear axle speed ratio is 875, and the seats and configurations of the new MRT have been modified and optimized. According to reason, it can pull ten tons.
4. Seven hours. The d30 engine, the full name of Yunnedwei d30 engine, is mainly the introduction of German engine technology, which has a relatively high market share in light trucks. When a truck is planted with eight tons of cargo, it takes an average of 60 kilometers per hour, and it takes about seven hours to run 400 kilometers.
5. High-pressure common rail technology, super-long oil change, more worry-free and effort-saving. Yunnei's engine is famous in the small and medium-sized cylinder diesel engine industry. It is quite solid, anti-fabrication, and the quality can be said to be very good.The sales volume has risen steadily over the years, indicating that the market recognition is high. With 750 tires, it is not a big problem to pull five or six tons to run in the mountains.
6. This car has 0-liter displacement and 156 horsepower. The rear axle is wrapped in 5 tons. This design can pull up to about 10 tons, and the beam is a double-layer design, and the carrying power is barred. You can rest assured to pull 5 to 6 tons at ordinary times. Pulling 10 tons is the steel plate that needs to be strengthened.
TC is the English abbreviation of INTEC, Chinese name is "intelligent fuel-saving king", I is the English intercoole of intercooler R abbreviation. At present, there are two powers, GWM8TCI and GWM5TCI.
Four-cylinder b: Diesel engine 22: Total working volume (engine displacement, 2 liters) tci: It is the so-called turbocharger, (Turbo Charger with Inter-cooler exhaust gas turbocharger) The technology is average, many engine factories Everyone is producing this model of machine, such as Changchai, Yunnei, Hafei, etc.
TID--- It specifically refers to BYD's turbocharging, in-cylinder direct injection and dual clutch technology. TI---refers to turbocharged engines with an intercooler, which is generally divided into TSI and TCI. TSI turbocharged gasoline engine with intercooler TCI turbocharged diesel engine with intercooler.
1, GW5TCI is a high-pressure common-rail technology "intelligent fuel-saving" diesel engine jointly developed by Great Wall Company and Bosch of Germany, which has the advantages of saving, quietness, strength and so on. The power can reach 80kW, the torque is 300N·m, and the comprehensive fuel consumption per 100 kilometers is only 0L, which is the lowest fuel consumption among similar models, and the power of 5L reaches the fuel consumption of a 5L sedan.
2. The engine of the Great Wall Haval h3 diesel version is the 25TCI INTEC "Intelligent Fuel-saving King" electronically controlled high-pressure common rail supercharged medium-cooled diesel engine developed by Great Wall and Bosch of Germany. The engine displacement is 25L, the power is 80Kw3600rpm, and the torque is 300Nm180. Above 02400rpm, I hope to help you.
3. The TCI engine is a diesel engine jointly developed by Great Wall Automobile and Bosch of Germany, which adopts electronically controlled high-voltage common rail technology and is equipped with an intercooler. TC is the English abbreviation of INTEC. The Chinese name is "Intelligent Fuel-saving King", and I is the English abbreviation of intercooler of intercooler. At present, there are two powers, GWM8TCI and GWM5TCI.
4, x0dx0The ax0dx0aTCI engine is a diesel engine jointly developed by Great Wall Automobile and Bosch of Germany, which adopts electronically controlled high-voltage common rail technology and is equipped with an intercooler. TC is the English abbreviation of INTEC. The Chinese name is "Intelligent Fuel-saving King", and I is the English abbreviation of intercooler for intercooler.
5. What engine does Infiniti g 25 use? Infiniti g25 uses a 5-liter v6 naturally aspirated engine. Infiniti G (check the transaction price | detailed explanation of the model) 25 is a medium-sized sedan under Infiniti. The wheelbase of this car is 2850mm, and the length, width and height are 4780mm, 1773mm and 1453mm respectively.
6. Finiti g25 uses a 5-liter v6 naturally aspirated engine.Finiti g25 is a medium-sized car under Finiti in the United Kingdom. Its wheelbase is 2850 mm, and the length, width and height are 4780 mm, 1773 mm and 1453 mm respectively. The Finiti g25 adopts a 5-liter naturally aspirated engine with a maximum torque of 235 horsepower and 253 Nm.
TSI stands for the abbreviation of the first letter of the word TwinchargerFuelStratifiedInjection, which can be understood as double supercharged + layered combustion + injection through the surface meaning of the letters.TSI is a highly efficient engine form, which will be the perfect unity of power and fuel economy.
TSI refers to double-charged turbine and mechanical supercharged layered injection technology, TFSI refers to fuel layered injection, TFSI turbocharged fuel layered injection engine, and this T, which is more than FSI, represents turbocharging.
D: In fact, it is DCT, that is, Dual clutch Transmission, that is, dual clutch transmission, that is, the vehicle volume adopts a dual clutch gearbox. Therefore, TID is a vehicle that adopts a turbocharged in-cylinder direct injection engine and a dual-clutch gearbox.
However, TSI adopts FSI technology, that is, injecting fuel into the cylinder through a high-pressure fuel pump, which is a method of indirect injection compared with direct injection engines.The most prominent feature of this engine is its strong horsepower and excellent economy when traveling at high speed.
1, TID--- specifically refers to turbocharging, in-cylinder direct injection, dual clutch technology. TI---refers to turbocharged engines with an intercooler, which is generally divided into TSI and TCI. TSI turbocharged gasoline engine with intercooler TCI turbocharged diesel engine with intercooler.
2. Automobile turbocharged engines with displacement can improve power and torque under the same displacement, and will not increase too much fuel consumption. The power of a car determines how fast it can run, and the torque determines how much it can carry and how fast it can accelerate.
3. In terms of the price of the whole machine, 5TCI has advantages, and the technology is also very mature. The maximum torque of 0T is larger than that of 5TCI, reaching more than 300 Nm. In addition, the Great Wall launched the 0T engine as an effort for the new emission standards.
4. TSI is the initials of the three key features of Turbo-charging, Super-charging and Injection.
5. The G6 we tested this time is equipped with the same 0TCI engine as the G5. Although the data is not as amazing as the latest in-cylinder direct injection 0TGDI, the maximum power of this 0TCI engine is 125kW@5500rpm, the maximum torque is 235Nm@1900rpm, and it is equipped with timing variable technology, and the book data is also good.
6. Of course, the new 0T engine is better. Compared with the old model, the displacement is smaller, the power and torque have been greatly improved, but the fuel consumption has decreased. The old 5TCI engine is equipped on H3H5, and the new model is now only configured on the new H5.
Four-cylinder engine. According to the official website of Pacific Automobile, the Jianghuai Ruifeng s5 engine model is a four-cylinder turbocharged engine, matched with a six-speed manual transmission and a six-speed dual-clutch transmission, with a maximum speed of 190km/h.
The brand's engine is an in-line three-cylinder engine. 2The 015 Chevrolet Chuangku uses two engines, one is a 0-liter turbocharged engine and the other is a 3-liter turbocharged engine. Both 0T and 3T turbocharged engines are in-line three-cylinder structures.
The Yinglang is a three-cylinder engine. The Yinglang is equipped with two engines, one is a 10-liter turbocharged engine, and the other is a 13-liter turbocharged engine. The Buick Enlang 15T model is equipped with a 10T in-line 3-cylinder turbocharged engine, matching two transmissions: 6-speed manual or 6-speed dual clutch. Box, maximum power 92KW, maximum torque.
Cars with T mean that the engine is turbocharged, and L means that the engine is a naturally aspirated engine.
As of September 11, 2021, Chevrolet models on sale are three-cylinder engines.The 535T model of the Merrybo XL is equipped with a 13T in-line 3-cylinder turbocharged engine, matched with a CVT stepless gearbox, with a maximum power of 121KW and a maximum torque of 240N·m. The 325T335T model is equipped with 10T.
BMW 320li engine parameters are equipped with a 20t turbocharged engine, the model is b48b20d, the maximum power is 115kw, the peak torque is 250nm, the cylinder arrangement is in series, the number of cylinders is 4, and the gas distribution mechanism is dohc with 2021 Take the Ma 320li as an example, which is a medium-sized car with a body size of 4719mm long.
HS code tagging in tariff databases
author: 2024-12-24 01:39Organic produce HS code verification
author: 2024-12-24 01:25HS code-based commodity chain analysis
author: 2024-12-23 23:46HS code-based negotiation with customs
author: 2024-12-23 23:32How to interpret global trade indicators
author: 2024-12-23 23:03Plant-based proteins HS code verification
author: 2024-12-24 00:06Pharma finished goods HS code references
author: 2024-12-23 23:17Precision machining HS code checks
author: 2024-12-23 23:14Precision machining HS code checks
author: 2024-12-23 23:03975.12MB
Check367.43MB
Check753.43MB
Check539.74MB
Check334.88MB
Check796.19MB
Check845.85MB
Check749.26MB
Check956.77MB
Check193.97MB
Check111.95MB
Check144.72MB
Check239.61MB
Check841.49MB
Check657.43MB
Check593.56MB
Check979.87MB
Check345.74MB
Check735.43MB
Check428.86MB
Check396.69MB
Check431.89MB
Check631.54MB
Check349.63MB
Check276.44MB
Check133.42MB
Check279.92MB
Check397.55MB
Check824.46MB
Check638.91MB
Check545.64MB
Check119.38MB
Check586.44MB
Check127.58MB
Check939.18MB
Check135.62MB
CheckScan to install
Export subsidies linked to HS codes to discover more
Netizen comments More
106 HS code lookup for Asia-Pacific markets
2024-12-24 01:42 recommend
1194 Tariff impact simulation tools
2024-12-24 00:54 recommend
903 Raw silk HS code identification
2024-12-23 23:37 recommend
536 How to leverage big data in trade
2024-12-23 23:28 recommend
1589 How to find compliant suppliers
2024-12-23 23:15 recommend