Global trade documentation templates

List of the contents of this article:

• 1, What's under the airport? What's the use of the lamp on the yellow shelf
• 2, When to see the near light in the flight area
• 3, The aviation ground lighting system mainly includes
• 4. Airport lighting system includes
• 5、What are the lights on the airport runway for

What's under the airport? What is the use of the lamp on the yellow shelf

Red anti-collision light: also known as beacon light, EACON LIGHT or BEACON, is installed in the upper and lower middle of the plane, one each. The purpose is to prevent aircraft collisions. This lamp bursts and flashes at a certain frequency depending on the controller adapted to the model.

Airport lights are visual navigation aid equipment for night and complex weather entry and landing, and an important auxiliary equipment for radio entry and landing systems. It has developed from simply providing visual indications and guidance signals for aircraft entry and landing at night to combined with radio entry and landing systems to ensure that aircraft entry and landing under low visibility conditions between day and night.

1 Landing light: It is used to illuminate the airport runway when the plane takes off and lands. There are two types: fixed and active. Some landing lights also have the function of taxi lighting. The movable landing lamp has a large power and is equipped with an electric mechanism, which can be placed. The landing light can reach hundreds of thousands of cans (1 can is equal to 0.9814 candlelight).

When to look at the approach light in the flight area

1. The simple approach lighting system consists of midline lights and horizontal lights. Type A is used for non-instrument runways, and type B is used for non-precision approach runways. The total length should be 420 meters, and a 30-meter or 18-meter-long horizontal lamp should be set up 300 meters from the entrance of the runway, and the longitudinal spacing of the lamps that constitute the middle line should be 60 meters.

2. The requirements are as follows: Once the light inspection and maintenance work is completed, the relevant personnel of the airport management agency shall be notified immediately.Before Evacuating The Flight Area, You Should Make Sure That The Lighting System Is Turned Off. Temporary equipment is used for light maintenance, and it should be removed before leaving the flight area.

3. The airport navigation lighting system is composed of an approach lighting system, a runway lighting system and a taxiway lighting system, each with different functions and effects. Well, the following is the basic knowledge of airport navigation lights that I have sorted out for you. Welcome to read and browse.

Aviation ground lighting system mainly includes

1. Runway lighting system: Runway lighting system is an important part of the airport lighting system, which is mainly used to provide bright lighting when the aircraft lands and help pilots see Clear the runway. The runway lighting system includes approach light, center light and boundary light, etc.

2. The light indication system includes navigation lights on the left and right wings, navigation emblem lights on the hanging tail, and anti-collision lights in the lower and upper parts of the fuselage. ( 1) The navigation light is mainly installed on the wing tip of the large wing. The front end of the wing tip is the left red and right green light, and the rear end of the wing tip is a white light.

3. External lighting mainly includes landing, taxi lighting and external lighting signals. 1 Landing light: It is used to illuminate the airport runway when the plane takes off and lands. There are two types: fixed and active. Some landing lights also have the function of taxi lighting. The movable landing lamp has a large power and is equipped with an electric mechanism, which can be placed.

Airport lighting system includes

Airport lighting system mainly includes the following parts: runway lighting system: runway lighting systemIt is an important part of the airport lighting system, which is mainly used to provide bright lighting when the plane lands and helps pilots see the runway clearly. The runway lighting system includes approach light, center light and boundary light, etc.

Approproxiation lighting system 1. Approach midline light: a fixed light mark installed on the midline of the runway, and its color is variable white.

The airport navigation lighting system is composed of an approach lighting system, a runway lighting system and a taxiway lighting system, each with different functions and effects. Well, the following is the basic knowledge of airport navigation lights that I have sorted out for you. Welcome to read and browse.

External lighting mainly includes landing, taxi lighting and external lighting signals. Landing lights: used to illuminate the airport runway when the plane takes off and lands. There are two types: fixed and active.Some landing lights also have the function of taxi lighting. The movable landing lamp has a large power and is equipped with an electric mechanism, which can be placed.

What are the lights on the airport runway for

1. Identify the light sign. Use the specified Morse code to emit green flashes intermittently. When there are several airports in an area, each airport sets up one and sends out different codes to distinguish them. Close-up light. Also known as slide lamp.

2. It is composed of midline lights and horizontal beam lights. Type A is used for non-instrument runways, and type B is used for non-precision approach runways. The total length should be 420 meters, and a 30-meter or 18-meter-long horizontal lamp should be set up 300 meters from the entrance of the runway, and the longitudinal spacing of the lamps that constitute the middle line should be 60 meters.

3. The first is the green runway entrance light mentioned above. At the other end of the runway, the pilot will see a set of lights that are also perpendicular to the runway, but they are red, called runway end lights, which are used to remind the pilot that this is the end of the runway.

4. Landing light: It is used to illuminate the airport runway when the plane takes off and lands. There are two types: fixed and active. Some landing lights also have the function of taxi lighting. The movable landing lamp has a large power and is equipped with an electric mechanism, which can be placed. The landing light can reach hundreds of thousands of kan.

5. At the end of the runway: red light, the middle line of the taxiway: green light, the boundary on both sides of the taxiway: blue light. In the process of approaching and landing towards a large airport, the pilot saw the following lights emitted by the airport lights in turn: airport light signs. Installed in the airport, it emits a strong flash of white and green.One for each airport, which is used to indicate the location of the airport.