HS code indexing for procurement catalogs

How to install the car bumper

1. Install the rear bracket. When installing the rear bracket, you need to remove the bolts of the original car. Here, use a 13 wrench. , and then install a longer bolt card main bracket. Finally, install the pedal and the front bumper. You need to prepare the tools mentioned before and an electric drill (7 drills) to the front bar behind you.

2. The installation of the door bumper is to place several high-strength steel beams horizontally or inclinedly in the door panel of each door to play the role of bumpers in front and rear of the car. In this way, the whole vehicle basically has bumpers &ldquo escort&rdquo, and through development and change, it becomes &ldqu O Iron wall &rdquo, so that the occupants in the car have a maximum safety area.

3. First, remove the screws on the lining of the front link and break the lining. You can see that several spline screws inside have also been removed. THEN LOOK INSIDE WITH THE LIGHT AND YOU WILL SEE THAT 3 10MM SCREWS ARE ALSO REMOVED TOGETHER (SAME LEFT AND RIGHT).

4, - cover plate; 2-guide part; 3 ~ 7 - bolt 03 press the front bumper cover plate 1 on the guide rail 2 on the left and right sides of the wing plate in the direction of the arrow B until they lock each other.04 Pay attention to the size of the gap. Tighten all the bolts. Two. Remove and install the rear bumper 1 Remove the rear bumper 01 Remove the taillight in the side panel.

5. Installation method of the front bumper bracket of Vechi car: install the front bumper energy absorption block into the front bumper, and then install the front fog light on the front bumper. Insert the front fog light harness plug into the fixed seat. Install the pre-buried bracket of the front bumper into the front beam of the engine compartment and fix it with a nut.

How to install a car without Bluetooth

The in-car Bluetooth connection method is: first turn on the Bluetooth of the mobile phone and set it to "visible to everyone". It is recommended to turn on USB debugging mode for Android mobile phones. Turn on the Bluetooth setting function of the vehicle screen and turn on the Bluetooth function. Search for Bluetooth devices on your mobile phone, and then select to pair and connect.The pairing password is generally: 0000.

Use the AUX cable to connect the mobile phone and the car stereo: Connect the AUX cable from the mobile phone to the AUX input port of the car stereo, then turn on the car stereo and select the music you want to play.

For example, if the other party does not have wireless contact information such as telephone and mobile phone, it is impossible for you to contact the other party directly through mobile phone and other communication tools; if you want to connect the mobile phone with Bluetooth, you need to install a car Bluetooth driver and Bluetooth module in the car.

Car navigation can be installed without Bluetooth. It is necessary to install on-board Bluetooth drivers and Bluetooth modules for cars. Major 4S stores and car repair shops or online stores have on-board Bluetooth systems for sale.

What are the possible production accidents that may occur when installing the car door

After replacing the door, it may affect the sound insulation effect of the car and make the sealing performance of the car worse. Generally speaking, a major accident will occur when the door is replaced. If the door dents are not large, it is recommended that the owner should not replace the door. In general, the door can be restored to its original appearance through sheet metal repair.

The replacement of the car's door is not necessarily an accident car, but it is also possible that some parts in the door are damaged and replaced.

The door of the car is not a consumable part. If the door of the car is disassembled and replaced, it is possible that a collision safety accident will cause the car door to be seriously deformed, which has no repair value, causing the car door to be directly disassembled and replaced. It is also possible that the car door may have some faults, and the car will be disassembled and replaced due to the fault. The door does not belong to the accident car.

The door is not easy to damage. Once the door is replaced, a collision may occur, resulting in serious deformation of the door and no maintenance value, resulting in the direct replacement of the door. There may also be some faults in the car door. Replacing the door due to malfunction is not an accident car.

How much does changing the door affect the car? Replacing the door of the car may affect the sound insulation of the car, and may also cause the sealing of the car to deteriorate.

How to install the car cushion

1. Take out the front row of the car cushion, put it in the cushion vest, put on the cushion head cover, take out the chuck, and install the chuck. Put the cuck into the gap, put it in the cuck and get stuck, put it in the cuck, adjust the cushion apron, put the elastic band of the car cushion apron, and put it into the car cushion headrest.

2. Installation process of car seat cushion: Before installation, first check the quality of the purchased car seat cushion and the strength and length of the stitching, etc., so as to lay a good foundation for the rear installation.

3. Method The first step: first check whether all aspects of the car cushion are not damaged and whether the number of pieces is complete. Generally, car cushions include two front-driver seats, two single backrests and one long cushion, a total of five pieces.

4. First, connect the chuck to the elastic band, just pass the elastic band through the cuck. Then insert the slot into the seat gap and pull the chuck out from the back of the seat. Link the elastic band to the metal hook, as shown in the figure below.

Notes on car installation

1. Vehicles carrying containers shall not exceed 2 meters;The height of other motor vehicles shall not exceed 5 meters above the ground; when motorcycles carry objects, the height from the ground shall not exceed 5 meters, and the length of the body shall not exceed 0.2 meters.

2. After installing the luggage rack, the screws should be checked regularly. The inspection interval depends on different road conditions and loads. Generally speaking, it is best to check once a week; the goods should be tied up or fixed to the luggage rack.

3. Avoid installing it in an overheating place in the car. Avoid installing it close to the water source; because excessive humidity will cause leakage and aging of the stabilizer. It should be placed in a well-ventilated position so that the air can flow to lower the temperature of the stabilizer.

List of the catalog of this article:

• 1,HS code indexing for procurement catalogs The correct way to install the secondary battery of the car
• 2, How to install car bumper
• 3, How to install a car without Bluetooth
• 4. What are the possible production accidents that may occur when installing car doors< /Li>
• 5、
• Step 7: Complete registration
• Once you have completed all necessary steps and agreed to the terms of HS code indexing for procurement catalogs, congratulations! You have successfully registered a HS code indexing for procurement catalogs account. Now you can enjoy a wealth of sporting events, thrilling gaming experiences and other excitement from HS code indexing for procurement catalogs