HS code-driven portfolio diversification

Cars are HS code-driven portfolio diversificationan indispensable means of transportation in our lives, and the engine is the core of cars. The quality of engine installation is directly related to the performance and service life of the car. Next, this article will introduce the mechanism, steps and precautions of engine installation. I. The mechanism of engine installation. As the heart of the car, the engine can drive the movement of the whole vehicle. Engine installation is to connect the engine to the car body so that it can run stably. The base, transmission system, oil line, cooling system and other parts of the engine need to be assembled correctly and work together to ensure the smooth operation of the engine, so as to ensure the normal operation of the car. II. Steps of engine installation 1. Preparation work Before starting to install the engine, relevant preparations need to be carried out.This includes cleaning the chassis of the car body, thoroughly checking the engine base and other additional parts, and checking whether the transmission rod, intake duct and other parts are intact. In addition, the lubricating oil needs to be replaced and checked to ensure the normal operation of the lubrication system. 2. Put the engine on the body, place the ready-made engine parts on the body, and fix it to the frame on the ground. Make sure that the direction of the engine installation is consistent with the frame of the vehicle, and return the trimmed components to their proper position as much as possible. 3. The accessories are installed at the bottom of the engine. You need to install the water pump, oil pump, starter, and other necessary components. In this process, you should first ensure that the installed accessories are in the correct position relative to the bottom of the engine. You should also lubricate the interface of the relevant accessories before installing the components to prevent damage to the seal;4. When connecting the transmission system, you also need to connect the transmission and clutch together to ensure the smooth transmission of the machine. During the operation process, you need to pay attention to the patting of the clutch disc and the friction disc and the coating of the friction paint. After installation, you need to check the clutch pressure plate, clutch blade, secondary transmission and transmission throttle to ensure normal operation. 5. Connect the cooling system. In order to effectively dissipate the high heat generated during the work of the car, it is also necessary to install electric fans and radiators to connect the cooling system and ensure the normal operation of the pump. 6. During the operation of installing the support system, you also need to ensure the stability of the engine support system. If it is not installed well, it will lead to the overall imbalance of the engine, causing the clutch to lose its proper function, thus affecting the normal operation of the car.III. Precautions In the process of engine installation, the following points should also be paid attention to: 1. Ensure that the force of the accessories is appropriate: When installing radiators, water pumps and other accessories, it is necessary to pay attention to the appropriate force to ensure that the connection is in a tight state. Poor sealing may cause mechanical failure. 2. Pay attention to the connection of wires: It is dangerous to ignore the connection of any wires, especially the wires connected to the driver's control electrical device. You need to check carefully and make sure that each wire is connected to the correct position. 3. Check the lubrication system: When installing the engine, make sure that the lubrication system works normally. This includes checking the lubrication and sealing between the housing, internal parts, piston and cylinder wall of the internal parts. 4. Check the throat tube: In the power distribution system, the throat tube (or fuel system) needs to be connected to the correct position on the engine to ensure the normal operation of the fuel component.When checking whether the clamp mouth is connected correctly, pay attention to check whether the hydraulic, oil pipe, joint, oil pump, fuel injector and air outlet are airtight. 5. Pay attention to personal safety: During the installation process, you need to pay attention to the safety of personnel. Especially when lifting the engine, it is necessary to ensure absolute safety and prevent the occurrence of twisting, tumbling, slipping and other situations. At the same time, keep the working area clean and tidy and always pay attention to the surrounding environment. In short, engine installation is a complex, time-consuming process that requires professional knowledge and skills. This article briefly introduces the key points, but in practice, it also needs to be combined with professional tools and equipment according to the characteristics of different engines. If you are not familiar with the operation steps of engine installation, it is recommended that you seek professional help to ensure safety and efficiency.

Contact Us
Phone：020-83484686