Protect pedestrians. The biggest advantage of the plastic bumper is that it can protect pedestrians. If the vehicle hits pedestrians while driving, the impact force can be fully absorbed to minimize the damage to pedestrians. Second, it is easy to maintain. It is normal to have slight bumps when using the car, and the bumper is a place that is easy to damage.
Relatively low price: For car companies, it is also very important to reduce the production cost of cars, so many car companies choose to use plastic bumpers, which can invest in the research and development of other components to provide better services for consumers.
The price is relatively low and economical.Considering that the use of plastic car bumpers can save the cost of manufacturing, and the funds can be used in work such as material research and development to improve the performance of the whole vehicle. In addition, it has strong plasticity, which is convenient for design and production.
Car bumper is a decorative device installed at the front and rear of the car, which can absorb and relieve external shocks and protect the safety of the body and passengers. Many years ago, car bumpers were mainly made of metal materials, and the surface was plated with a layer of chrome. The U-channel steel is riveted together with the longitudinal beam of the frame, which plays a protective role.
The lighter the quality of the plastic bumper, the lighter the quality of the car, the more ideal the fuel consumption, and the better the braking effect; the plastic bumper also has good insulation, anti-corrosion, aging resistance, wear resistance, scrubbrush resistance, waterproof, and in the event of a slight collision, it can also automatically recover according to its own elasticity.
Plastic bumpers can not only save manufacturing costs, but also have lower requirements for the industrial level and are easier to produce. Therefore, after the cost of car manufacturing is controlled, the price of the final product to consumers will also be more reasonable, which must correspond. Of course, in addition to plastic bumpers, some top sports cars will also use a large number of carbon fiber materials.
Legal. It is legal to change the modified front bar of the car. You need to go to the DMV for the record and change the shape of the vehicle. If the registration is changed, it is not illegal, and if it is not registered, it is illegal. The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.
[Pacific Automobile Network]Without the prior approval of the traffic management department, the car with modified bumpers is of course illegal and cannot pass the annual inspection normally. Even after the approval of the traffic management department, it should be noted that the vehicle license plate is inadvertently covered, which is an illegal act of deliberately covering and damaging the license plate.
It is legal to change the modified front bar of the car, but it needs to be filed with the DMA. According to the provisions of China's motor vehicle registration regulations, if the vehicle bumper is replaced, if the vehicle body is changed, if the registration is changed, it is not illegal, and if it is not registered, it is illegal.
The bumper of the car is on the head of the car, called the front bumper of the car, which is called the tail of the car It's the rear bumper. As a car accessory, car bumpers are easy to be rubbed in daily driving, and are also common parts in daily driving.
The head of the car. As a protective component of the front of the vehicle, the front bumper of the car can absorb and reduce the impact of the collision in the event of a collision, and protect the front structure of the vehicle and important parts of the engine from serious damage.
The front lever of the car is also called the front bumper of the car. The bumper of the car is at the head of the car, which is called the front bumper of the car, and the rear bumper at the rear of the car.The bumper is located in most areas in the front and rear of the car. It mainly absorbs and mitigates external impacts and protects the front and rear safety devices of the car body.
Park the vehicle on the lift. After taking safety measures, lift the vehicle to the appropriate height. Remove the rear bumper bolts from the left and right sides. Pull the rear bumper out of the guide groove in parallel, and the bumper is disassembled.
First, you need to park the vehicle on the flat ground and pull up the handbrake. When disassembling, you need to pay attention to the lights and lines on the bumper. When disassembling, remove the wire and lamp first, and finally remove the bumper. Remove the wires, screws and hidden snaps and take them off.
First, remove the screw under the front bumper, then open the front cover, open the front cover and remove the headlight screw. If you feel that it is difficult to remove when removing the left and right wing plates, you can turn the steering wheel and adjust it to the appropriate position. Finally, remove the bumper safely by removing a few screws on the keel. Pay special attention to the lights and lines on the bumper.
First, park the vehicle and turn off the engine. Second, it is the process of removing various screws. Stand in front of the car, find a total of 4 screws on both sides of the front wheel, and then remove them with a wrench. Lying on the ground and sticking your head under the car, you will see a total of 6 screws, and then remove them with a sleeve.
Step 1: First, turn the car to the right to the full wheel, turn off the engine, and disconnect the negative pole of the battery. Step 2: Remove the fixing screws.
As shown in the figure below, remove the front bumper 01 and unswell the bolts 3 and 4 on the left and right sides. 02 UNSTW THE BOLTS ON THE LEFT AND RIGHT SIDES 2 (FACING UP). Only with the help of another mechanic can it be further disassembled.
1. Among all the exterior parts of the car, the most easily damaged part is the front and rear bumper. If the bumper is seriously deformed or broken, it can only be replaced. However, in general, if the bumper is only deformed by a gentle impact, or a very serious crack appears, there is a way to repair it without replacing it.
2. In view of what you said, the insurance company can only compensate for the repair and baking of the front bar.
3. Unless in one case, the insurance company may replace you with a new one, the car is a luxury car, etc., and then affects driving safety, which is also a particularly serious situation that can only be replaced with a new one. It's normal for the car to bump. The bumper is all plastic. If you hit it a few more times, you won't feel it, and you won't be so entangled. Calm down.
4. Under normal circumstances, car insurance claims are prioritized by repair. If it needs to be replaced, the degree of damage must first meet the standards required by the insurance company before it can be replaced. The reference terms of vehicle damage insurance are as follows: Article 16 Insured motor vehicles damaged by insurance accidents shall be repaired as much as possible.
5. No. The insurance company's principle for bumper claims is that if there is damage, it will be replaced. If there is no damage, it can only be repaired if it is deformed. If the bumper is flat, the insurance company cannot replace it.The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.
Car bumpers are mainly the outer bar part made of plastic. Behind the outer bar is the bumper bracket, which is generally made of iron material that is easy to deform. It's done. At both ends of the bumper, there are two bumper cards, in addition to some bumper covers, such as ventilation grilles and traction covers.
The plastic bumper of a general car is composed of three parts: outer plate, cushioning material and beam. Among them, the outer plate and buffer material are made of plastic, and the crossbeam is stamped into a U-shaped groove with cold-rolled thin plate; the outer plate and buffer material are attached to the crossbeam.
Under normal circumstances, the bumper maintenance is carried out with the car. During the maintenance of the vehicle, the bumper can be overhauled. If there is a problem, try to focus on repair. If the exercise surface is really large, it can be replaced directly. Compared with repair, the price is relatively higher.
Nowadays, the front and rear bumpers of cars are made of plastic. The plastic bumpers of ordinary cars are composed of three parts: outer plate, cushioning material and crossbeam. Among them, the outer plate and cushioning material are made of plastic, and the crossbeam is stamped with cold-rolled thin plate to form a U-shaped groove. The outer plate and buffer material are attached to the crossbeam, and the shape is more harmonious and unified with the car body, and lighter.
And the bumpers of Volkswagen's Audi 100, Golf, Shanghai's Santana, Tianjin's Charley and other models of cars are made of polypropylene materials and injection molding.
Global trade data for currency hedging-APP, download it now, new users will receive a novice gift pack.
Protect pedestrians. The biggest advantage of the plastic bumper is that it can protect pedestrians. If the vehicle hits pedestrians while driving, the impact force can be fully absorbed to minimize the damage to pedestrians. Second, it is easy to maintain. It is normal to have slight bumps when using the car, and the bumper is a place that is easy to damage.
Relatively low price: For car companies, it is also very important to reduce the production cost of cars, so many car companies choose to use plastic bumpers, which can invest in the research and development of other components to provide better services for consumers.
The price is relatively low and economical.Considering that the use of plastic car bumpers can save the cost of manufacturing, and the funds can be used in work such as material research and development to improve the performance of the whole vehicle. In addition, it has strong plasticity, which is convenient for design and production.
Car bumper is a decorative device installed at the front and rear of the car, which can absorb and relieve external shocks and protect the safety of the body and passengers. Many years ago, car bumpers were mainly made of metal materials, and the surface was plated with a layer of chrome. The U-channel steel is riveted together with the longitudinal beam of the frame, which plays a protective role.
The lighter the quality of the plastic bumper, the lighter the quality of the car, the more ideal the fuel consumption, and the better the braking effect; the plastic bumper also has good insulation, anti-corrosion, aging resistance, wear resistance, scrubbrush resistance, waterproof, and in the event of a slight collision, it can also automatically recover according to its own elasticity.
Plastic bumpers can not only save manufacturing costs, but also have lower requirements for the industrial level and are easier to produce. Therefore, after the cost of car manufacturing is controlled, the price of the final product to consumers will also be more reasonable, which must correspond. Of course, in addition to plastic bumpers, some top sports cars will also use a large number of carbon fiber materials.
Legal. It is legal to change the modified front bar of the car. You need to go to the DMV for the record and change the shape of the vehicle. If the registration is changed, it is not illegal, and if it is not registered, it is illegal. The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.
[Pacific Automobile Network]Without the prior approval of the traffic management department, the car with modified bumpers is of course illegal and cannot pass the annual inspection normally. Even after the approval of the traffic management department, it should be noted that the vehicle license plate is inadvertently covered, which is an illegal act of deliberately covering and damaging the license plate.
It is legal to change the modified front bar of the car, but it needs to be filed with the DMA. According to the provisions of China's motor vehicle registration regulations, if the vehicle bumper is replaced, if the vehicle body is changed, if the registration is changed, it is not illegal, and if it is not registered, it is illegal.
The bumper of the car is on the head of the car, called the front bumper of the car, which is called the tail of the car It's the rear bumper. As a car accessory, car bumpers are easy to be rubbed in daily driving, and are also common parts in daily driving.
The head of the car. As a protective component of the front of the vehicle, the front bumper of the car can absorb and reduce the impact of the collision in the event of a collision, and protect the front structure of the vehicle and important parts of the engine from serious damage.
The front lever of the car is also called the front bumper of the car. The bumper of the car is at the head of the car, which is called the front bumper of the car, and the rear bumper at the rear of the car.The bumper is located in most areas in the front and rear of the car. It mainly absorbs and mitigates external impacts and protects the front and rear safety devices of the car body.
Park the vehicle on the lift. After taking safety measures, lift the vehicle to the appropriate height. Remove the rear bumper bolts from the left and right sides. Pull the rear bumper out of the guide groove in parallel, and the bumper is disassembled.
First, you need to park the vehicle on the flat ground and pull up the handbrake. When disassembling, you need to pay attention to the lights and lines on the bumper. When disassembling, remove the wire and lamp first, and finally remove the bumper. Remove the wires, screws and hidden snaps and take them off.
First, remove the screw under the front bumper, then open the front cover, open the front cover and remove the headlight screw. If you feel that it is difficult to remove when removing the left and right wing plates, you can turn the steering wheel and adjust it to the appropriate position. Finally, remove the bumper safely by removing a few screws on the keel. Pay special attention to the lights and lines on the bumper.
First, park the vehicle and turn off the engine. Second, it is the process of removing various screws. Stand in front of the car, find a total of 4 screws on both sides of the front wheel, and then remove them with a wrench. Lying on the ground and sticking your head under the car, you will see a total of 6 screws, and then remove them with a sleeve.
Step 1: First, turn the car to the right to the full wheel, turn off the engine, and disconnect the negative pole of the battery. Step 2: Remove the fixing screws.
As shown in the figure below, remove the front bumper 01 and unswell the bolts 3 and 4 on the left and right sides. 02 UNSTW THE BOLTS ON THE LEFT AND RIGHT SIDES 2 (FACING UP). Only with the help of another mechanic can it be further disassembled.
1. Among all the exterior parts of the car, the most easily damaged part is the front and rear bumper. If the bumper is seriously deformed or broken, it can only be replaced. However, in general, if the bumper is only deformed by a gentle impact, or a very serious crack appears, there is a way to repair it without replacing it.
2. In view of what you said, the insurance company can only compensate for the repair and baking of the front bar.
3. Unless in one case, the insurance company may replace you with a new one, the car is a luxury car, etc., and then affects driving safety, which is also a particularly serious situation that can only be replaced with a new one. It's normal for the car to bump. The bumper is all plastic. If you hit it a few more times, you won't feel it, and you won't be so entangled. Calm down.
4. Under normal circumstances, car insurance claims are prioritized by repair. If it needs to be replaced, the degree of damage must first meet the standards required by the insurance company before it can be replaced. The reference terms of vehicle damage insurance are as follows: Article 16 Insured motor vehicles damaged by insurance accidents shall be repaired as much as possible.
5. No. The insurance company's principle for bumper claims is that if there is damage, it will be replaced. If there is no damage, it can only be repaired if it is deformed. If the bumper is flat, the insurance company cannot replace it.The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.
Car bumpers are mainly the outer bar part made of plastic. Behind the outer bar is the bumper bracket, which is generally made of iron material that is easy to deform. It's done. At both ends of the bumper, there are two bumper cards, in addition to some bumper covers, such as ventilation grilles and traction covers.
The plastic bumper of a general car is composed of three parts: outer plate, cushioning material and beam. Among them, the outer plate and buffer material are made of plastic, and the crossbeam is stamped into a U-shaped groove with cold-rolled thin plate; the outer plate and buffer material are attached to the crossbeam.
Under normal circumstances, the bumper maintenance is carried out with the car. During the maintenance of the vehicle, the bumper can be overhauled. If there is a problem, try to focus on repair. If the exercise surface is really large, it can be replaced directly. Compared with repair, the price is relatively higher.
Nowadays, the front and rear bumpers of cars are made of plastic. The plastic bumpers of ordinary cars are composed of three parts: outer plate, cushioning material and crossbeam. Among them, the outer plate and cushioning material are made of plastic, and the crossbeam is stamped with cold-rolled thin plate to form a U-shaped groove. The outer plate and buffer material are attached to the crossbeam, and the shape is more harmonious and unified with the car body, and lighter.
And the bumpers of Volkswagen's Audi 100, Golf, Shanghai's Santana, Tianjin's Charley and other models of cars are made of polypropylene materials and injection molding.
International trade compliance dictionary
author: 2024-12-23 22:58Textile finishing HS code analysis
author: 2024-12-23 22:46HS code integration in trade blockchains
author: 2024-12-23 22:29Real-time customs data reports
author: 2024-12-23 21:44HS code-driven supplier reduction strategies
author: 2024-12-23 20:47How to utilize blockchain for trade
author: 2024-12-23 22:19HS code monitoring tools for exporters
author: 2024-12-23 22:14HS code-based customs broker RFPs
author: 2024-12-23 21:22Trade data integration with BI tools
author: 2024-12-23 21:21
How to build a resilient supply chain
117.97MB
Check
trade data solutions
277.12MB
Check
Industry-specific HS code database
275.26MB
Check
HS code-driven supply chain benchmarking
648.97MB
Check
Biofuels HS code classification
633.18MB
Check
International market entry by HS code
173.19MB
Check
European Union trade analytics
638.37MB
Check
Non-tariff barriers by HS code
991.34MB
Check
Tire imports HS code classification
987.27MB
Check
Predictive trade route realignment
558.82MB
Check
HS code-based value chain optimization
965.14MB
Check
HS code-based FTA utilization
885.65MB
Check
import data visualization
161.78MB
Check
HS code-based transport cost modeling
566.83MB
Check
HS code-driven differentiation strategies
583.47MB
Check
Organic textiles HS code verification
281.37MB
Check
HS code categorization for finished goods
955.69MB
Check
HS code-driven market entry strategy
193.55MB
Check
Tobacco products HS code verification
782.45MB
Check
Advanced import export metric tracking
578.51MB
Check
Identifying duty exemptions via HS code
726.94MB
Check
How to analyze customs transaction records
675.78MB
Check
HS code monitoring tools for exporters
567.59MB
Check
Special economic zones HS code strategies
567.35MB
Check
Raw silk HS code identification
476.97MB
Check
supply chain transparency
268.79MB
Check
HS code alignment with import quotas
548.34MB
Check
How to reduce lead times with trade data
441.38MB
Check
Commodity-specific import licensing data
526.17MB
Check
Trade data integration with ERP systems
625.68MB
Check
Processed foods HS code mapping
822.25MB
Check
HS code-based compliance cost reduction
798.13MB
Check
Textile supply chain HS code mapping
445.27MB
Check
International trade law reference data
652.83MB
Check
Advanced customs data integration
773.45MB
Check
HS code-based commodity chain analysis
376.54MB
Check
Scan to install
Global trade data for currency hedging to discover more
Netizen comments More
2182 Trade data for intellectual property checks
2024-12-23 22:58 recommend
2564 HS code-based FTA utilization
2024-12-23 22:49 recommend
2563 Mining industry HS code analysis
2024-12-23 22:43 recommend
2197 High-tech exports HS code categorization
2024-12-23 22:21 recommend
875 Global trade management software comparison
2024-12-23 21:10 recommend