Step 1: Will be installed Insert the disk into the computer, set it as the first startup item, and then start from it. Set language, keyboard, etc. Step 2: Click "Repair Computer" in the lower left corner. Then select "Troulfic" and "Advanced Options". Step 3: Then select "System Restore" and follow the instructions on the screen.
Download MaxDOS+WinPE. After decompressing, click [install.bat] and enter "Y" on the installation interface. The installer will detect your currently connected USB flash drive and list it.If the USB flash drive is not detected, please reinsert the USB flash drive and press "Y" to return to the main menu to start the installation again.
The operation of one-click USB flash drive startup is very simple. When the USB flash drive is connected, press the shortcut boot key continuously after booting or restarting. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm. After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
Specific operation steps of the USB disk reinstallation system: Insert the USB disk, open the small white USB disk boot disk production tool, select "Production System", select the production USB disk in the production system, select your USB disk in the selection of the USB disk, other parameters default, and start production.
Click the "Start" menu and type in the program Open "Ghost" and start the Ghost program. The next operation steps are the same as using Ghost to install the system.
ComputerThe installation system can be installed with a USB disk. The specific installation steps are as follows. Make a USB disk boot disk, make a USB disk boot disk and a ghost version of the system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.
Download the operating system image file. You can download the mirror file of the operating system that needs to be installed from the official website or other reliable channels and save it to your computer. Insert the USB flash drive and format it. Insert the USB flash drive into the computer, then open "My Computer" or "This Computer", right-click the USB flash drive, and select "Format".
The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to saveOmit the following steps), search and download old hairy peach or cabbage and other startup USB disk making tools on the Internet, insert the USB disk into the computer and run this software to make a startup USB disk.
. Make a boot USB flash drive: Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to omit the following steps), search and download boot USB flash drive making tools such as old hairy peach or cabbage on the Internet, insert the USB flash drive into the computer to run this software to make a boot USB flash drive.
This is the step of the USB disk installation system "Cabbage USB disk boot disk first makes the USB disk into cabbage USB disk startup disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk boot to enter the cabbage main menu, and select "[04] Cabbage Win2003PE Classic Edition (Old machine)" option, press the Enter key to confirm.
Install the system with the USB disk. Insert the USB flash drive to turn on, press DEL or other keys to enter the BIOS, and set the setting to start from USB-F10-Y-Enter. Install the system according to the prompts. Pull out the USB flash drive. After the installation is completed, pull out the USB flash drive, and the computer will automatically restart. Click: Start the computer from the local hard disk and continue the installation. Restart the computer. After the installation is completed, restart it.
You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.
After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
Download a system that needs to be installed. The online is generally a CD-ROM image file ISO system file, or you can also take only GHOST.GHO system file backup and copy it to your P On the E boot disk.
Prepare an 8G or above USB flash drive, search and download the small white USB disk boot disk making tool and Windows system mirror file on Baidu. Open the small white USB disk boot disk making tool, and then switch to "USB disk startup-USB disk mode", select the USB disk that needs to be made and click "One-click to make USB disk boot disk" according to the default parameters.
The USB disk is made into a cabbage USB disk boot disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk to boot to enter the cabbage main menu, select the "[04] Cabbage Win2003PE Classic Edition (old machine)" option, and press the Enter key to confirm.
It may be an error in the installation of the system. It is best to install the system manually by yourself. Do not use Jinshan or 360 to reinstall the system. Next, let's talk about the steps to install the Windows 7 system in the USB flash drive. Insert the USB flash drive into the computer. Because it has been set to start from the USB flash drive, the power-on will automatically start from the USB flash drive.
1. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
2. Set the first startup item of the computer to the USB flash drive to start. In the past, when installing the system with a CD-ROM, the boot item must be adjusted to the optical drive startup, but now we need to use the USB disk to install the system, so we need to adjust it to USB disk to start.
3. You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot U disk boot disk making tool] to make a u boot disk boot disk.
4. ● Set the first boot item of the computer to start the USB device. In the past, to install the system with a CD-ROM, the boot item had to be adjusted to the optical drive boot, but now we need to install the system with a USB flash drive, so we need to adjust it to USB flash drive to start.
5. If in the pastWhen the installation of the system is completed, a backup is made, and the backup can be used to restore the system. If no backup is done, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps to restore the system.
6. Open the computer that needs to reinstall the system, insert the USB flash drive just made, press the F12 key continuously during the boot process, select the boot item as the USB flash drive, and it will automatically restart after saving, as shown in the figure below.
Click the "Start" menu, open "Ghost" in the program, and start the Ghost program, The next operation steps are the same as using Ghost to install the system.
The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make a system USB flash drive to omit the following steps), search and download old hairy peach or cabbage and other startup USB flash drive production tools on the Internet, and insert the USB flash drive into the computer. This software is made into a boot USB flash drive.
The computer installation system can be installed with a USB disk. The specific installation steps are as follows: Make a USB disk boot disk, a USB disk boot disk, a ghost version system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.
You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.
Granular HS code detail for compliance officers-APP, download it now, new users will receive a novice gift pack.
Step 1: Will be installed Insert the disk into the computer, set it as the first startup item, and then start from it. Set language, keyboard, etc. Step 2: Click "Repair Computer" in the lower left corner. Then select "Troulfic" and "Advanced Options". Step 3: Then select "System Restore" and follow the instructions on the screen.
Download MaxDOS+WinPE. After decompressing, click [install.bat] and enter "Y" on the installation interface. The installer will detect your currently connected USB flash drive and list it.If the USB flash drive is not detected, please reinsert the USB flash drive and press "Y" to return to the main menu to start the installation again.
The operation of one-click USB flash drive startup is very simple. When the USB flash drive is connected, press the shortcut boot key continuously after booting or restarting. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm. After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
Specific operation steps of the USB disk reinstallation system: Insert the USB disk, open the small white USB disk boot disk production tool, select "Production System", select the production USB disk in the production system, select your USB disk in the selection of the USB disk, other parameters default, and start production.
Click the "Start" menu and type in the program Open "Ghost" and start the Ghost program. The next operation steps are the same as using Ghost to install the system.
ComputerThe installation system can be installed with a USB disk. The specific installation steps are as follows. Make a USB disk boot disk, make a USB disk boot disk and a ghost version of the system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.
Download the operating system image file. You can download the mirror file of the operating system that needs to be installed from the official website or other reliable channels and save it to your computer. Insert the USB flash drive and format it. Insert the USB flash drive into the computer, then open "My Computer" or "This Computer", right-click the USB flash drive, and select "Format".
The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to saveOmit the following steps), search and download old hairy peach or cabbage and other startup USB disk making tools on the Internet, insert the USB disk into the computer and run this software to make a startup USB disk.
. Make a boot USB flash drive: Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make it into a system USB flash drive to omit the following steps), search and download boot USB flash drive making tools such as old hairy peach or cabbage on the Internet, insert the USB flash drive into the computer to run this software to make a boot USB flash drive.
This is the step of the USB disk installation system "Cabbage USB disk boot disk first makes the USB disk into cabbage USB disk startup disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk boot to enter the cabbage main menu, and select "[04] Cabbage Win2003PE Classic Edition (Old machine)" option, press the Enter key to confirm.
Install the system with the USB disk. Insert the USB flash drive to turn on, press DEL or other keys to enter the BIOS, and set the setting to start from USB-F10-Y-Enter. Install the system according to the prompts. Pull out the USB flash drive. After the installation is completed, pull out the USB flash drive, and the computer will automatically restart. Click: Start the computer from the local hard disk and continue the installation. Restart the computer. After the installation is completed, restart it.
You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.
After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
Download a system that needs to be installed. The online is generally a CD-ROM image file ISO system file, or you can also take only GHOST.GHO system file backup and copy it to your P On the E boot disk.
Prepare an 8G or above USB flash drive, search and download the small white USB disk boot disk making tool and Windows system mirror file on Baidu. Open the small white USB disk boot disk making tool, and then switch to "USB disk startup-USB disk mode", select the USB disk that needs to be made and click "One-click to make USB disk boot disk" according to the default parameters.
The USB disk is made into a cabbage USB disk boot disk, restart the computer and wait for the boot screen to appear, press the startup shortcut key, select the USB disk to boot to enter the cabbage main menu, select the "[04] Cabbage Win2003PE Classic Edition (old machine)" option, and press the Enter key to confirm.
It may be an error in the installation of the system. It is best to install the system manually by yourself. Do not use Jinshan or 360 to reinstall the system. Next, let's talk about the steps to install the Windows 7 system in the USB flash drive. Insert the USB flash drive into the computer. Because it has been set to start from the USB flash drive, the power-on will automatically start from the USB flash drive.
1. After entering the shortcut start menu, we use the up and down arrow keys to select the USB device and press Enter to confirm.After that, the system will automatically restart and then enter the pe system. We can start to reinstall the system.
2. Set the first startup item of the computer to the USB flash drive to start. In the past, when installing the system with a CD-ROM, the boot item must be adjusted to the optical drive startup, but now we need to use the USB disk to install the system, so we need to adjust it to USB disk to start.
3. You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot U disk boot disk making tool] to make a u boot disk boot disk.
4. ● Set the first boot item of the computer to start the USB device. In the past, to install the system with a CD-ROM, the boot item had to be adjusted to the optical drive boot, but now we need to install the system with a USB flash drive, so we need to adjust it to USB flash drive to start.
5. If in the pastWhen the installation of the system is completed, a backup is made, and the backup can be used to restore the system. If no backup is done, it is recommended to reinstall the system. It is very convenient to install the system with a USB flash drive, which is basically similar to the steps to restore the system.
6. Open the computer that needs to reinstall the system, insert the USB flash drive just made, press the F12 key continuously during the boot process, select the boot item as the USB flash drive, and it will automatically restart after saving, as shown in the figure below.
Click the "Start" menu, open "Ghost" in the program, and start the Ghost program, The next operation steps are the same as using Ghost to install the system.
The startup is slow. The way to reinstall the system with a USB flash drive is: make a boot USB flash drive and go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make a system USB flash drive to omit the following steps), search and download old hairy peach or cabbage and other startup USB flash drive production tools on the Internet, and insert the USB flash drive into the computer. This software is made into a boot USB flash drive.
The computer installation system can be installed with a USB disk. The specific installation steps are as follows: Make a USB disk boot disk, a USB disk boot disk, a ghost version system image file, and store it in the made USB disk boot disk. Change the hard disk mode to ahci mode.
You can reinstall the computer system with a USB disk. The steps are as follows to make a USB disk boot disk with [u boot USB disk boot disk making tool] to make a u boot disk boot disk.
HS code-based tariff reconciliation
author: 2024-12-24 00:28Raw leather HS code references
author: 2024-12-24 00:14Global trade pattern recognition
author: 2024-12-23 23:36Global trade e-commerce insights
author: 2024-12-23 22:12Aluminum products HS code insights
author: 2024-12-23 22:06Machinery exports HS code insights
author: 2024-12-24 00:18Aggregated global trade insights dashboard
author: 2024-12-24 00:12Tire imports HS code classification
author: 2024-12-23 23:48Refined sugar HS code identification
author: 2024-12-23 23:21Global trade documentation templates
author: 2024-12-23 22:55914.24MB
Check364.13MB
Check537.99MB
Check746.43MB
Check821.91MB
Check995.62MB
Check633.45MB
Check491.83MB
Check994.18MB
Check983.27MB
Check333.97MB
Check386.69MB
Check836.81MB
Check986.32MB
Check456.44MB
Check266.57MB
Check555.44MB
Check414.51MB
Check291.63MB
Check772.26MB
Check224.73MB
Check194.47MB
Check876.41MB
Check432.75MB
Check646.84MB
Check623.23MB
Check534.37MB
Check435.79MB
Check984.73MB
Check666.62MB
Check443.45MB
Check964.36MB
Check494.34MB
Check621.87MB
Check494.79MB
Check256.31MB
CheckScan to install
Granular HS code detail for compliance officers to discover more
Netizen comments More
244 Nutraceuticals HS code verification
2024-12-24 00:37 recommend
2325 HS code-based alternative sourcing strategies
2024-12-24 00:19 recommend
2218 How to select the best trade data provider
2024-12-23 23:58 recommend
2718 Organic chemicals (HS code ) patterns
2024-12-23 23:06 recommend
2905 Advanced trade data analytics techniques
2024-12-23 22:11 recommend