There are four ways to input the ez2 one s file of the new algebraic car system. Manual input: Manually enter the code of the S file in the editor of EZ2, which is suitable for users who are familiar with the syntax of the S file. File import: Import the written S file into EZ2, which is suitable for users who already have S files.
The positioning of the knife holder should be abnormal. Try other ways to reposition it: hit the meter and hit the spindle to jump. The spindle is large and small for a while, and it is useless to do it. This is a problem of the accuracy of the machine tool. It depends on whether there is an error in the outer diameter size or the horizontal size.
Throttle valve problem The most common reason for car jitter may be excessive throttle valve and too much carbon in the fuel injector.
At this time, as long as the O/D switch is turned off and the use of the overspeed gear is restricted, the car can stably go uphill in the 3rd gear without forming a "cyclic jump". If the ramp is steeper and the automatic transmission forms a "circular jump" between the 3rd and 2nd gears, the gear lever should be placed in the 2nd gear, so that the automatic transmission can be stable in the 2nd gear.
Turn off hibernation, open [Control Panel] [Power Options] [Hibernation] in turn, and uncheck [Enable Hibernation].
SYNTEC refers to Taiwan's new generation SYNTEC industrial control system. The new generation of products covers lathe and milling machine controller and industrial machinery controller. At present, it is the professional PC-based CNC controller brand with the most complete product line and the most development potential in China.
New generation system SYNTEC: Parameter modification: On the first page, press the rightmost or leftmost button under the display, and the "Parameter Settings" button appears. Find the parameter to be changed. When you need to enter the password, enter the parameter password "520".
Control button. The new generation system teach is a robot controller used to control the movement and operation of the robot.Teach is the abbreviation of teaching in English, which means teaching, because it can teach and control robots through handles or keyboards.
It can carry out end milling, drilling, expansion, boring, tapping and other processing processes. It has a wide range of uses, especially suitable for processing various three-dimensional convex and convex models with complex shapes and complex cavities and surfaces. It is more suitable for batch processing parts in enterprise production workshops.
The new generation system is developed on the basis of the traditional numerical control system. It adopts more advanced hardware and software technology, has stronger computing and processing capabilities, and has higher accuracy and stability.
There are many ways to process mechanical parts in modern machinery manufacturing: in addition to cutting, there are also casting, forging, welding, stamping, extrusion, etc., but all of them are fineParts with high degree requirements and fine surface roughness requirements generally need to be finally processed by cutting on the machine tool.
1. SYNTEC is the CNC system of Suzhou New Generation CNC Equipment Co., Ltd.
2. The numerical control system is the abbreviation of the digital control system. The English name is (Numerical Control System). According to the control program stored in the computer memory, it performs part or all of the numerical control functions, and is equipped with an interface circuit and servo drive installation. Set up a dedicated computer system.
3. SYNTEC numerical control system. Santos CNC machine tool, equipped with SYNTEC numerical control system, the main circuit of the CNC lathe has a spindle motor, which is used to achieve spindle rotation and feed movement, followed by a cooling pump motor and a sliding plate fast-moving motor.
4. Syntec is a new generation of CNC Co., Ltd. Founded in 1995, New Generation CNC Co., Ltd. is a professional PC-based digital controller manufacturer. It has been engaged in software and hardware technology research and development of machine tool controllers for a long time, and is committed to expanding the cross-strait market.
Method 1: You can use the basic instruction G01 to complete the chamfer. First, let the tool move to the starting point of the chamfer, and then use the following instructions.G01 X Z F X, Z is the coordinate value of the camfer end point, and F is the feed quantity. Method 2: Use direct drawing programming method. If it is 45 shamfer, use the following format.
Automatic camfering and rounded corner instruction format of the machine tool, straight line to straight line. A straight line connects an arc. The arc is connected to a straight line. The arc is connected to the arc.
The degree of chamfer is simple, take an outer circle with a diameter of 60MM and give it a chamfer of 2MM. First of all, subtract 4MM from the diameter (the X axis of the machine tool is the diameter programming, and if it is a radius programming, subtract 2MM) The program is: G00X56, Z0. G01X60Z-2, F0.1.
U5 W F100 G01 code is used for linear interpolation movement of the tool. Function: G01 instruction makes the tool move straight to the target point from the point at a certain feed speed.
If it is a 45° camfer, G00 X__ Z__; after positioning, G1 X__ Z__ F__; that is, X Z moves at the same time, and the X value is twice that of Z.
Straight line backward inverted right angle Format: G01X (U)_ Z (W)_ C_; Function: straight line backward inverted right angle, instructing the tool from point A to point B, and then to point C.
1. Use the same. It mainly depends on your own usage requirements. If it is a machine with the same accessories and the same factory, you can't feel the difference if you use it normally. The main difference is that the new generation system is a bargain, and the equipment using the new generation system is also a bargain, which is naturally poor in all aspects.
2. So far, lathes, milling machines, grinding machines and other tool controllers have been successfully developed. The open architecture system with the general-purpose industrial controller as the core adopts an open architecture based on the general-purpose 32-bit industrial controller and DOS platform, which is easy to maintain and update the system, and has good reliability. The two can't be compared to which one is troublesome, and each has its own advantages and advantages.
3. I have 3 machines, both Vihong and the new generation. Vihong is easy to operate and simple to use. Novices use Weihong quickly, but they need a computer belt. Sometimes it crashes in summer. The new generation is relatively sensitive and can call the police if there is a problem. Personally, I think the new generation is good.
4. In terms of processing finish, the new generation is better. The ordinary processing method is faster than the new generation, but if you have 3D accuracy requirements, the new generation is not as good as Frank, and Frank's 3D is more guaranteed.FANUC system is a common CNC machine tool program in the CNC machine tool workshop. Its operation panel is simple and easy to understand.
5. It has its own characteristics and some shortcomings. Whether it's good or not depends on the actual situation. It is enough to process products, but more depends on operation and programming.
6. The new generation system is better than the Huazhong system. The cost performance of the new generation system is better, using the Snapdragon 870 processor. The Huazhong system adopts the Snapdragon 778g processor, and the performance of the new generation system is about 20% better than that of the Huazhong system.
Supplier risk profiling with trade data-APP, download it now, new users will receive a novice gift pack.
There are four ways to input the ez2 one s file of the new algebraic car system. Manual input: Manually enter the code of the S file in the editor of EZ2, which is suitable for users who are familiar with the syntax of the S file. File import: Import the written S file into EZ2, which is suitable for users who already have S files.
The positioning of the knife holder should be abnormal. Try other ways to reposition it: hit the meter and hit the spindle to jump. The spindle is large and small for a while, and it is useless to do it. This is a problem of the accuracy of the machine tool. It depends on whether there is an error in the outer diameter size or the horizontal size.
Throttle valve problem The most common reason for car jitter may be excessive throttle valve and too much carbon in the fuel injector.
At this time, as long as the O/D switch is turned off and the use of the overspeed gear is restricted, the car can stably go uphill in the 3rd gear without forming a "cyclic jump". If the ramp is steeper and the automatic transmission forms a "circular jump" between the 3rd and 2nd gears, the gear lever should be placed in the 2nd gear, so that the automatic transmission can be stable in the 2nd gear.
Turn off hibernation, open [Control Panel] [Power Options] [Hibernation] in turn, and uncheck [Enable Hibernation].
SYNTEC refers to Taiwan's new generation SYNTEC industrial control system. The new generation of products covers lathe and milling machine controller and industrial machinery controller. At present, it is the professional PC-based CNC controller brand with the most complete product line and the most development potential in China.
New generation system SYNTEC: Parameter modification: On the first page, press the rightmost or leftmost button under the display, and the "Parameter Settings" button appears. Find the parameter to be changed. When you need to enter the password, enter the parameter password "520".
Control button. The new generation system teach is a robot controller used to control the movement and operation of the robot.Teach is the abbreviation of teaching in English, which means teaching, because it can teach and control robots through handles or keyboards.
It can carry out end milling, drilling, expansion, boring, tapping and other processing processes. It has a wide range of uses, especially suitable for processing various three-dimensional convex and convex models with complex shapes and complex cavities and surfaces. It is more suitable for batch processing parts in enterprise production workshops.
The new generation system is developed on the basis of the traditional numerical control system. It adopts more advanced hardware and software technology, has stronger computing and processing capabilities, and has higher accuracy and stability.
There are many ways to process mechanical parts in modern machinery manufacturing: in addition to cutting, there are also casting, forging, welding, stamping, extrusion, etc., but all of them are fineParts with high degree requirements and fine surface roughness requirements generally need to be finally processed by cutting on the machine tool.
1. SYNTEC is the CNC system of Suzhou New Generation CNC Equipment Co., Ltd.
2. The numerical control system is the abbreviation of the digital control system. The English name is (Numerical Control System). According to the control program stored in the computer memory, it performs part or all of the numerical control functions, and is equipped with an interface circuit and servo drive installation. Set up a dedicated computer system.
3. SYNTEC numerical control system. Santos CNC machine tool, equipped with SYNTEC numerical control system, the main circuit of the CNC lathe has a spindle motor, which is used to achieve spindle rotation and feed movement, followed by a cooling pump motor and a sliding plate fast-moving motor.
4. Syntec is a new generation of CNC Co., Ltd. Founded in 1995, New Generation CNC Co., Ltd. is a professional PC-based digital controller manufacturer. It has been engaged in software and hardware technology research and development of machine tool controllers for a long time, and is committed to expanding the cross-strait market.
Method 1: You can use the basic instruction G01 to complete the chamfer. First, let the tool move to the starting point of the chamfer, and then use the following instructions.G01 X Z F X, Z is the coordinate value of the camfer end point, and F is the feed quantity. Method 2: Use direct drawing programming method. If it is 45 shamfer, use the following format.
Automatic camfering and rounded corner instruction format of the machine tool, straight line to straight line. A straight line connects an arc. The arc is connected to a straight line. The arc is connected to the arc.
The degree of chamfer is simple, take an outer circle with a diameter of 60MM and give it a chamfer of 2MM. First of all, subtract 4MM from the diameter (the X axis of the machine tool is the diameter programming, and if it is a radius programming, subtract 2MM) The program is: G00X56, Z0. G01X60Z-2, F0.1.
U5 W F100 G01 code is used for linear interpolation movement of the tool. Function: G01 instruction makes the tool move straight to the target point from the point at a certain feed speed.
If it is a 45° camfer, G00 X__ Z__; after positioning, G1 X__ Z__ F__; that is, X Z moves at the same time, and the X value is twice that of Z.
Straight line backward inverted right angle Format: G01X (U)_ Z (W)_ C_; Function: straight line backward inverted right angle, instructing the tool from point A to point B, and then to point C.
1. Use the same. It mainly depends on your own usage requirements. If it is a machine with the same accessories and the same factory, you can't feel the difference if you use it normally. The main difference is that the new generation system is a bargain, and the equipment using the new generation system is also a bargain, which is naturally poor in all aspects.
2. So far, lathes, milling machines, grinding machines and other tool controllers have been successfully developed. The open architecture system with the general-purpose industrial controller as the core adopts an open architecture based on the general-purpose 32-bit industrial controller and DOS platform, which is easy to maintain and update the system, and has good reliability. The two can't be compared to which one is troublesome, and each has its own advantages and advantages.
3. I have 3 machines, both Vihong and the new generation. Vihong is easy to operate and simple to use. Novices use Weihong quickly, but they need a computer belt. Sometimes it crashes in summer. The new generation is relatively sensitive and can call the police if there is a problem. Personally, I think the new generation is good.
4. In terms of processing finish, the new generation is better. The ordinary processing method is faster than the new generation, but if you have 3D accuracy requirements, the new generation is not as good as Frank, and Frank's 3D is more guaranteed.FANUC system is a common CNC machine tool program in the CNC machine tool workshop. Its operation panel is simple and easy to understand.
5. It has its own characteristics and some shortcomings. Whether it's good or not depends on the actual situation. It is enough to process products, but more depends on operation and programming.
6. The new generation system is better than the Huazhong system. The cost performance of the new generation system is better, using the Snapdragon 870 processor. The Huazhong system adopts the Snapdragon 778g processor, and the performance of the new generation system is about 20% better than that of the Huazhong system.
How to structure long-term contracts
author: 2024-12-23 22:26Export subsidies linked to HS codes
author: 2024-12-23 21:46Predictive trade data modeling
author: 2024-12-23 21:35Shipping lane performance metrics
author: 2024-12-23 20:56Fish and seafood HS code mapping
author: 2024-12-23 20:23HS code-based multi-country consolidation
author: 2024-12-23 22:29Advanced materials HS code classification
author: 2024-12-23 21:53Ceramic tiles HS code classification
author: 2024-12-23 19:48849.82MB
Check999.44MB
Check276.74MB
Check921.74MB
Check953.99MB
Check749.16MB
Check265.32MB
Check448.82MB
Check869.38MB
Check156.82MB
Check242.86MB
Check611.69MB
Check852.44MB
Check871.79MB
Check119.21MB
Check441.18MB
Check328.23MB
Check595.24MB
Check569.28MB
Check449.58MB
Check538.17MB
Check755.24MB
Check939.97MB
Check984.54MB
Check692.69MB
Check333.79MB
Check141.69MB
Check244.26MB
Check396.49MB
Check649.75MB
Check337.47MB
Check974.37MB
Check228.34MB
Check626.57MB
Check956.55MB
Check944.49MB
CheckScan to install
Supplier risk profiling with trade data to discover more
Netizen comments More
1983 HS code-based cargo insurance optimization
2024-12-23 22:20 recommend
822 Textile exports HS code breakdown
2024-12-23 21:40 recommend
2475 Trade data for strategic pricing
2024-12-23 21:35 recommend
2359 Country block exemptions by HS code
2024-12-23 21:17 recommend
1456 HS code-based warehousing strategies
2024-12-23 21:14 recommend