The mixed gas is too thick: When the engine mixed gas is too thick, the phenomenon is: it is difficult to accelerate after starting, and the engine runs unevenly; the exhaust pipe smokes black smoke, and the engine is accompanied by a strange sound; the engine power decreases and the fuel consumption increases.Most of these are related to carbon accumulation, filter blockage, etc., and generally do not need to be overhauled.
When the vehicle starts, the valve will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. Second, the abnormal sound made by the belt when starting. In this case, it is necessary to check whether there is a problem with the belt in time. If there is an abnormal sound of the belt, first check.
The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal sounds. This situation is normal. Just wait for a while and wait for the engine temperature to rise to the normal level.
The abnormal noise during the cold start of the engine may be caused by engine oil dirt, improper oil viscosity, excessive engine carbon accumulation, carbon tank solenoid valve failure, secondary injection system failure, electric vacuum air pump, etc.
1. The engine claw pad is aging. The claw pad plays the role of supporting the engine. After aging, it will make a strange sound when the car starts.
2. There are many reasons for the abnormal sound when starting the car.Including low engine temperature, thermal expansion of automobile ternary catalyst, gearbox failure, engine belt or chain wear, etc.
3. There are many reasons for abnormal noise when the car starts, including low engine temperature, thermal expansion of the car's ternary catalyst, gearbox failure, engine belt or chain wear, etc. The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal noise.
4. The reasons for the abnormal sound of the car starting and the solution are as follows: there is a sharp chirping sound at the moment the car starts.
5. Once the fuel of the car is insufficient, the engine will make a rattling sound when it is ignited, but it will also occur that it cannot start normally. It must be checked.Whether the fuel is sufficient or not, this problem is very easy to solve. You only need to add fuel in time.
1. Try to check the coolant, the oil pressure is too high or too low, check the oil pressure gauge, and there may be a problem with the ignition time setting, which will also lead to such symptoms. As for others, it may be an internal problem with the engine, such as EGR valve blockage.
2. Caused by engine carbon accumulation, because the old engine oil is getting thinner and thinner, more and more carbon accumulates. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
3. The engine foot mat is aging, resulting in the inability to reduce the vibration. The engine and the frame are softly connected, and the foot mat is separated from the engine and the frame. Over time, the rubber rubber sleeve of the foot mat slowly ages and loses its original shock absorption effect, and the noise will naturally become louder. The design of the vehicle itself leads to loud noise.
HS code verification in Middle Eastern markets-APP, download it now, new users will receive a novice gift pack.
The mixed gas is too thick: When the engine mixed gas is too thick, the phenomenon is: it is difficult to accelerate after starting, and the engine runs unevenly; the exhaust pipe smokes black smoke, and the engine is accompanied by a strange sound; the engine power decreases and the fuel consumption increases.Most of these are related to carbon accumulation, filter blockage, etc., and generally do not need to be overhauled.
When the vehicle starts, the valve will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. Second, the abnormal sound made by the belt when starting. In this case, it is necessary to check whether there is a problem with the belt in time. If there is an abnormal sound of the belt, first check.
The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal sounds. This situation is normal. Just wait for a while and wait for the engine temperature to rise to the normal level.
The abnormal noise during the cold start of the engine may be caused by engine oil dirt, improper oil viscosity, excessive engine carbon accumulation, carbon tank solenoid valve failure, secondary injection system failure, electric vacuum air pump, etc.
1. The engine claw pad is aging. The claw pad plays the role of supporting the engine. After aging, it will make a strange sound when the car starts.
2. There are many reasons for the abnormal sound when starting the car.Including low engine temperature, thermal expansion of automobile ternary catalyst, gearbox failure, engine belt or chain wear, etc.
3. There are many reasons for abnormal noise when the car starts, including low engine temperature, thermal expansion of the car's ternary catalyst, gearbox failure, engine belt or chain wear, etc. The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal noise.
4. The reasons for the abnormal sound of the car starting and the solution are as follows: there is a sharp chirping sound at the moment the car starts.
5. Once the fuel of the car is insufficient, the engine will make a rattling sound when it is ignited, but it will also occur that it cannot start normally. It must be checked.Whether the fuel is sufficient or not, this problem is very easy to solve. You only need to add fuel in time.
1. Try to check the coolant, the oil pressure is too high or too low, check the oil pressure gauge, and there may be a problem with the ignition time setting, which will also lead to such symptoms. As for others, it may be an internal problem with the engine, such as EGR valve blockage.
2. Caused by engine carbon accumulation, because the old engine oil is getting thinner and thinner, more and more carbon accumulates. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
3. The engine foot mat is aging, resulting in the inability to reduce the vibration. The engine and the frame are softly connected, and the foot mat is separated from the engine and the frame. Over time, the rubber rubber sleeve of the foot mat slowly ages and loses its original shock absorption effect, and the noise will naturally become louder. The design of the vehicle itself leads to loud noise.
HS code compliance in cross-border rail freight
author: 2024-12-24 01:32HS code-driven demand planning
author: 2024-12-24 01:30HS code-based compliance in Asia-Pacific
author: 2024-12-24 00:41Food additives HS code classification
author: 2024-12-24 00:29Real-time trade document filing
author: 2024-12-24 00:15Global supply chain partner networks
author: 2024-12-24 01:34Advanced trade route cost analysis
author: 2024-12-24 01:31Automated import export risk alerts
author: 2024-12-24 01:04Electronics global trade by HS code
author: 2024-12-24 00:58935.51MB
Check681.97MB
Check386.31MB
Check331.69MB
Check827.71MB
Check252.58MB
Check438.76MB
Check586.73MB
Check461.48MB
Check159.21MB
Check593.65MB
Check155.17MB
Check946.71MB
Check482.41MB
Check328.28MB
Check478.77MB
Check339.52MB
Check594.93MB
Check461.68MB
Check315.39MB
Check895.37MB
Check813.84MB
Check452.56MB
Check657.88MB
Check242.94MB
Check362.93MB
Check337.34MB
Check578.45MB
Check425.63MB
Check222.42MB
Check885.16MB
Check871.24MB
Check675.75MB
Check614.13MB
Check346.75MB
Check524.81MB
CheckScan to install
HS code verification in Middle Eastern markets to discover more
Netizen comments More
2048 How to align trade data with demand planning
2024-12-24 02:16 recommend
466 Global commodity price tracking
2024-12-24 00:59 recommend
1291 HS code intelligence for oil and gas industry
2024-12-24 00:58 recommend
514 How to scale export operations with data
2024-12-24 00:40 recommend
1189 Textile supply chain HS code mapping
2024-12-24 00:16 recommend