1. Steps for replacing the car battery: the battery is broken from the negative electrode. The power-off of the battery should be cut from the negative pole of the battery first. If it is careless from the positive pole, it may come into contact with the body and iron, causing a short circuit and burning of the body electrical appliances. The storage battery is off the positive electrode.
2. Disassemble the old battery (1) Confirm the installation part of the battery. Most models are installed in the engine compartment or luggage compartment, and some models are also installed in the cockpit. Take good body protection measures in the corresponding position.
3. When disassembly, remove the negative pole of the battery pile head first, and then remove the positive pole; when installing, install the positive pole first and then install the negative pole, and the battery ampere and model should be correct. Before folding the battery, find a battery connected in parallel with the battery to be replaced. Otherwise, the power supply will be cut off. Some door glass needs to be matched.
1. Car Battery Replacement Steps: Battery Disconnected and Negative Electrode. The power-off of the battery should be cut from the negative pole of the battery first. If it is careless from the positive pole, it may come into contact with the body and iron, causing a short circuit and burning of the body electrical appliances. The storage battery is off the positive electrode.
2. Replace the battery - Put the new battery into the place where the old battery was removed before, and connect the positive and negative poles to the correct side.Reconnect the positive pole - tighten the clamp with a wrench. Reconnect the negative pole - tighten the clamp with a wrench.
3. First of all, we need to open the hood of the car and expose the part of the battery in front of us. We can clearly see that there are two electrodes, one is red and the other is black. So the red we see is the positive pole of the battery. Black is the load negative pole of the car body, and the red positive pole Remove it first.
4. Correct operation of changing the car battery: remove the old battery first and confirm the battery part; remove the battery protective cover; turn off the ignition switch of the faulty vehicle, disconnect the negative connection cable, and then disconnect the positive connection cable. If it has a ventilation tube, it should be removed first. Remove the fixing device of the battery and take out the battery.
The price is about 200 yuan.Under normal circumstances, general family cars are relatively economical, and the batteries of new cars often last for 3-4 years, but after being replaced once, they generally need to be replaced in about 2 years.
yuan-about 1600 yuan. The battery life is usually 4-6 years. According to the instructions in the car manual, the most important thing to choose a battery is the following three parameters: external size (battery installation size, too large to fit), battery capacity (if your car is 40AH, you can choose 40AH-50AH), battery voltage (12V, 24V, etc.).
The price of replacing a car battery is about 200 yuan. The service life of a car battery is related to the driving environment and driving habits. Daily maintenance will also affect the service life of the car battery. Generally, the new car battery can be used for about 3-4 years, and the replaced battery is generally updated for 2 years. Change it once.
Ordinary car batteries cost about 300~500 yuan each. If it is a maintenance-free battery, the price will be relatively more expensive, about 500~700 yuan; if it is a power-on battery, the price will be more expensive, which costs more than 1,000 yuan.
The battery price of a pure electric vehicle is one-third of the whole vehicle. The battery capacity of each new energy vehicle is different. For models with a range of more than 400 kilometers, the battery capacity is basically more than 60 kwh, that is to say, the battery price is more than 90,000 yuan.
Value-added exports by HS code-APP, download it now, new users will receive a novice gift pack.
1. Steps for replacing the car battery: the battery is broken from the negative electrode. The power-off of the battery should be cut from the negative pole of the battery first. If it is careless from the positive pole, it may come into contact with the body and iron, causing a short circuit and burning of the body electrical appliances. The storage battery is off the positive electrode.
2. Disassemble the old battery (1) Confirm the installation part of the battery. Most models are installed in the engine compartment or luggage compartment, and some models are also installed in the cockpit. Take good body protection measures in the corresponding position.
3. When disassembly, remove the negative pole of the battery pile head first, and then remove the positive pole; when installing, install the positive pole first and then install the negative pole, and the battery ampere and model should be correct. Before folding the battery, find a battery connected in parallel with the battery to be replaced. Otherwise, the power supply will be cut off. Some door glass needs to be matched.
1. Car Battery Replacement Steps: Battery Disconnected and Negative Electrode. The power-off of the battery should be cut from the negative pole of the battery first. If it is careless from the positive pole, it may come into contact with the body and iron, causing a short circuit and burning of the body electrical appliances. The storage battery is off the positive electrode.
2. Replace the battery - Put the new battery into the place where the old battery was removed before, and connect the positive and negative poles to the correct side.Reconnect the positive pole - tighten the clamp with a wrench. Reconnect the negative pole - tighten the clamp with a wrench.
3. First of all, we need to open the hood of the car and expose the part of the battery in front of us. We can clearly see that there are two electrodes, one is red and the other is black. So the red we see is the positive pole of the battery. Black is the load negative pole of the car body, and the red positive pole Remove it first.
4. Correct operation of changing the car battery: remove the old battery first and confirm the battery part; remove the battery protective cover; turn off the ignition switch of the faulty vehicle, disconnect the negative connection cable, and then disconnect the positive connection cable. If it has a ventilation tube, it should be removed first. Remove the fixing device of the battery and take out the battery.
The price is about 200 yuan.Under normal circumstances, general family cars are relatively economical, and the batteries of new cars often last for 3-4 years, but after being replaced once, they generally need to be replaced in about 2 years.
yuan-about 1600 yuan. The battery life is usually 4-6 years. According to the instructions in the car manual, the most important thing to choose a battery is the following three parameters: external size (battery installation size, too large to fit), battery capacity (if your car is 40AH, you can choose 40AH-50AH), battery voltage (12V, 24V, etc.).
The price of replacing a car battery is about 200 yuan. The service life of a car battery is related to the driving environment and driving habits. Daily maintenance will also affect the service life of the car battery. Generally, the new car battery can be used for about 3-4 years, and the replaced battery is generally updated for 2 years. Change it once.
Ordinary car batteries cost about 300~500 yuan each. If it is a maintenance-free battery, the price will be relatively more expensive, about 500~700 yuan; if it is a power-on battery, the price will be more expensive, which costs more than 1,000 yuan.
The battery price of a pure electric vehicle is one-third of the whole vehicle. The battery capacity of each new energy vehicle is different. For models with a range of more than 400 kilometers, the battery capacity is basically more than 60 kwh, that is to say, the battery price is more than 90,000 yuan.
How to simplify export documentation
author: 2024-12-24 01:42Industrial lubricants HS code classification
author: 2024-12-24 01:07Industrial spare parts HS code mapping
author: 2024-12-23 23:41HS code-driven market penetration analysis
author: 2024-12-23 23:29Agriculture trade by HS code in Africa
author: 2024-12-24 00:35How to identify emerging market suppliers
author: 2024-12-23 23:50Global trade lead generation tools
author: 2024-12-23 23:50159.27MB
Check667.67MB
Check488.56MB
Check216.62MB
Check335.57MB
Check128.17MB
Check411.31MB
Check395.49MB
Check295.88MB
Check988.13MB
Check277.81MB
Check823.63MB
Check794.48MB
Check943.36MB
Check632.21MB
Check966.15MB
Check764.94MB
Check652.24MB
Check775.21MB
Check417.73MB
Check662.71MB
Check935.25MB
Check588.41MB
Check137.92MB
Check616.34MB
Check717.81MB
Check481.75MB
Check992.46MB
Check559.45MB
Check859.25MB
Check123.63MB
Check736.15MB
Check112.37MB
Check995.49MB
Check242.46MB
Check599.46MB
CheckScan to install
Value-added exports by HS code to discover more
Netizen comments More
1525 Biotech imports HS code classification
2024-12-24 01:38 recommend
2721 HS code integration into supplier scorecards
2024-12-24 01:21 recommend
2527 Global trade finance compliance checks
2024-12-24 01:04 recommend
1769 Livestock products HS code classification
2024-12-24 00:56 recommend
2219 How to secure competitive freight rates
2024-12-24 00:26 recommend